dannywilko Posted July 25, 2009 Share Posted July 25, 2009 Need Help, i installed my alarm system all fully working, went to add a new infa red, now they all have stopped working, i have reset it loads of times, i have evn tried just riging1 infa red but still they wont come on. Any Ideas? Thank you Daniel Quote Link to comment Share on other sites More sharing options...
Secware_Tech6 Posted July 26, 2009 Share Posted July 26, 2009 I would suggest you have shorted out the 12v supply. this will either have blown the 12v fuse or the psu. First of all check all fuses with a multimeter. do not just replace the fuse you need to check the wiring etc and remove the fault. if the fuises pass check, then meter the 12v supply. if this has 0v then im afraid the psu has failed. Quote Link to comment Share on other sites More sharing options...
dannywilko Posted July 26, 2009 Author Share Posted July 26, 2009 but the door connector, siren, keypad etc still work its just the infa reds. Quote Link to comment Share on other sites More sharing options...
Secware Posted July 28, 2009 Share Posted July 28, 2009 Hi Please check the fuse it may well be that, like in a car the lights work but the fuse has gone on the cig lighter, I know its strange but try it Regards Support Quote Link to comment Share on other sites More sharing options...
dannywilko Posted July 28, 2009 Author Share Posted July 28, 2009 hi, i got it working now thank you daniel Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.