Secware Posted May 23, 2012 Share Posted May 23, 2012 Only zones 1,4,5 used .zone 1 is the exit/entry zone .All PIR detectors work on walk test and zone 1 works in chime mode.The alarm sets OK system bleeping until set . when the entry zone ( 1 ) operates it goes straight to alarm , after reset code entered the panel has zone 1 flashing only. Quote Link to comment Share on other sites More sharing options...
Secware Posted May 23, 2012 Author Share Posted May 23, 2012 Link out the unused zones, even if the zones are disabled and then try it again. Quote Link to comment Share on other sites More sharing options...
Secware Posted May 24, 2012 Author Share Posted May 24, 2012 All unused zones are shorted out. Quote Link to comment Share on other sites More sharing options...
Secware_Tech6 Posted August 19, 2012 Share Posted August 19, 2012 What is your entry time programmed as? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.