securitywarehouse
-
Posts
87 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by securitywarehouse
-
-
Does this kit come with an electric release lock please?
-
I just purchased from you the homelink 75 alarm system. I would like to purchased alarm box to put on the side of my house and operated the alarm system when we are upstairs at night. Please could you let me know which equipment I need to buy, thank you.
-
Hi Please can you help me as I need to burn a disc on from our cctv mutiplexer The make is Visage and it is a mod TSD 16 channel 320 HD unit . I will also require a default password as well
-
Hi can you help, I have a client with a alarm system, th only information we can find is its a , RS 125, I seem to remember that jSB made some of these alarms, its about 16 years old,
we need a new RKP for it,
7702-1762 VERSION 1-5
if you follow this link it brings up the manual
/mcalarms.co.uk/manuals/eb2160715c71a5288868dea766782281_RS125UserManual.pdf
can you tell ne if its availble and cost
-
Do you have a wall mounted Pir covering more than 120 degrees?
Like GE's Sharpshooter
-
Is the Secware 12v 2.2A/h Value Alarm Battery (product number 70/118) suitable for the above control panel?
Is it normal for this battery to require replacing after 5 years?
-
I need a Videx CESVK-1-eclipse intercom but with built in keypad? As the picture on your website does not show a keypad i wondered if this was possible.
-
I would like more details on the above lock, the description on the site indicates a weight of 4kg, the one we need to replace is only about 1/2 pound, could you let me know the size etc.
-
Can you please tell me are the "Honeywell Activ8 18m Quad Pet PIR's" are they 6 wire or 8 wire
-
Hello. My BPT A/200N (number 61404810) has one internal phone wired to the intercom located next to the gate to our property (single dwelling). I want to add one additional internal phone in another room of the dwelling (three phones are possible). BUT: I cannot run wires for this new phone back to the BPT A/200N powwer supply unit. Please advise me what I should purchase from you to do to this by wireless. Many thanks, Glenn
-
We Have a BPT system installed at our main entrance and i would like to change the access code as we have had a member of our team leave recently. We have no documentation to follow to allow us to change the code. Please could you assist in this matter.
-
I am looking for a simple intruder alarm system for a large house. Not really interested in remote access and monitoring or systems requiring computers to load up and configure. Need 4 x RKP and 19 x PIRs. No PAs or door contacts, though will want to use PA functions on all the RKPs. I really like the simplicity of setting up and using the Accenta control panel, but am I right in thinking that 8 zones are the maximum available for PIRs? I could easily group together 2 or 3 PIRs on some of the zones but that can make fault finding more tedious. Would appreciate you confirming number of zones available to PIRs on Accenta Gen4, also any suggestions for another product.
-
have an IP camera that I would like to alarm via a PIR. The Camera has I/O contacts & the input contacts create an alarm when shorted - the contacts are rated at 1amp @ 28v.
Please suggest a PIR which will work - normally open contacts I assume & preferably battery powered.
-
I have a Gardtecc 595 panel with a LCD Keypad. Can you supply remote keyfobs for this
-
I bought one Optima Compact Gen4 control panel in the past, and now I want to buy one more. Is there a way to arm/disarm the unit wirelessly? Is this what key fobs are for? If so, which is compatible?
-
hi just wanting to know what battery i need to buy for this sytem i have three sensors and one door contact and been told on 4 occasions differant ampage batteries
-
I have a Eurosec CP8L LCD. This has been very reliable.
However I have had a new front door fitted which meant using a new surface mounted reed sensor for my entry/Exit contact wired in series with my back door sensor.
I want to check my zone settings.
I want to reset my entry time to 30secs, unfortunately I am unable to programme the zones, the display just keeps going back to "do you want to Program Chime" and will not allow me to proceed further to Program Zones.
Have you any idea how I can get to the program zones.
I have done a factory reset, ie:- disconnected the power, etc but to no avail.
Have I pressed something I shouldn't have?
I have had this unit for a few years now and it has served me well, so I would appreciate any help to get is sorted.
-
I have a scantronic 9800 system, could you advise me of the battery I would need for this system please. Also, if you have this battery in stock.
-
Folks, I am looking for a replacement keypad for a Gardtec 800 alarm system which is a 6 wire Gtag type. Can you help out please? regards, Brian
-
currently have a Scantronic 9452 alarm system that is
going off at random times when not activated. When activated the alarm goes off and the tamper light is flashing even though the alarm has not been tampered with. Also the service and fault light flash intermittently.
-
I purchased the above from you as a replacement for one in which some of the pressure pads are not working. When installed, will the new unit retain my original 4 digit code?
-
Could you please advise the cost and delivery time
-
Is there a Videx VR4K-4s with a number keypad
-
i have been looking on your website at the videx access systems and am struggling in working out what i can buy to add to my system to make the system work better for us.
I currently have an 800 one button/ amp module in a surface mounted frame, this is connected to two phones on different floors in the building which allows us to unlock the door. There is also a seperate keypad that allows coded access.
We are dividing up our workplace and are looking to make the system 4 way / buttons - so customers can buzz the appropiate room for access.and also add another phone extension to the current set up. Looking at your website my initial thoughts are that i will need a 4 button module along with a amp module and 2 module surface mounted box along with 4 extra phones, but i am not sure exactly how it all works and whether this is correct. So am hoping you can answer my questions so i can get the right modules ordered ready for installation when i get my electrics sorted.
- Is the configuration above correct
- Is there different transformers / connectors i will need or will the one i have for single button work
- Can a couple of phones be connected to two buttons
- How many phones can be connected to one button
I have photos of my current set up if that is any use. I am hoping to get ordered as soon as possible so would appreciate the advice to make sure i get it right
[Ticket Question] Help with the Texecom 3d Petwise pir
in Intruder Alarms
Posted
Model ABC-0001
Can thsi be used outside under cover ,does it come with adjustable mounting bracket for outside mount.