securitywarehouse
-
Posts
87 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by securitywarehouse
-
-
I plan to buy an Optima Gen 4 security panel and would like to know what size battery/part number this unit takes so that I can order this at the same time.
-
All i need is a powermax Plus panel on its own , i do not want a kit. Can you stock just the panel only?
-
Hi there I am looking for a door access kit that has the capability to be PC based where users can be logged in and out when they enter or exit the building. Kind of like a clocking in and out. Where the problem of people holding the door open and people not swiping the card to register their clock in out.
It needs to be capable of handling 200 people or more and control multiple doors, possibly a maximum of 20.
I have taken a look at the paxton net2, but need more assurance as all we need for now is to control one door with 1 reader, em exit glass, and exit push with the capability to do the above. Without PC control.
We have quite a lot of access works in the pipeline so is there a minimum order for this kit and do you hold accounts?
Thanks,
-
I have an application where the customer has a wired system and wants a sensor put on a door but doesn't want a wire running across or in the wall. Is there a wireless door contact that can tx to a receiver that interfaces to the wired system ? Regards.
-
I was dismayed to learn that that my existing system (Accenta G4) does not
provide a key switch zone (I had been reading G3 manual in error). It is
important that I am able to set/unset/ clear alarm remotely.
However, I note that a simple set reader/key fob SS/01 is available for the
G4. Could this be wired somehow into the output of SD3 to allow system to be
set/unset remotely?
Many thanks
-
I just received my Visonic Tower PIR, and I'm nut quite sure it is operation correctly.
I installed the PIR as per instructions, about 2,3 meters up and with an angle setting of 5.
This should give me at least a +/- 10 meter 90 degrees coverage.
While in test mode it already showed "blank" areas where detection failed, and fully operational it will erractically detect motion (I keep in minde the 2 minute reset period after initial motion detection).
Sometimes it will only detect motion within a few inches, sometimes not at all.
I would be grateful for advice in this matter.
Regards,
-
Can you please tell me which fire detectors to install in a new house,they are to be connected to the fire zones on the Accenta G4 alarm system I bought from you previously.
-
I purchased a Veritas Excel panel with LCD keypad (order number 18090). On powering up the system for the first time, the keypad remains blank and does not display any text. The three LEDs on the side are lit and the keypad is illuminated and accepts key presses. Am I missing a configuration step somewhere or is the keypad/panel faulty?
-
I'm installing a stand alone door access system and need to know if I use a max reader, would I be able to operate this with the existing key fobs used to operate the intruder alarm max reader. The reader contolling the door would have no connection with intruder alarm system at all.
-
I have just received my scantronic 525r remote and would like to know to pair it with the control panel so I can use it.
-
i have the optex ax 130t beam system, but unfortunetely the plastic cover is damaged on one of the units. Can I buy a plastic cover only for this unit from you guys??
-
The Videx 845 panel, is a 5 button panel, but does it have the electrical connectors on the rear or is it just a facia panel?
-
I purchased from you last year a optima 4 replacement panel as my existing panel stopped working. Now my external sounder is so quiet you can hardley hear it, Please can you advise if this could be a fault within the panel or is it the sounder itself. I have checked all connections and they are ok
-
Do you stock Honeywell ECO1002A smoke detector for adding to Honeywell control panels?
-
Just purchased a Secware 2-way sound bomb from you. I have a Scantronic 9448+ Intruder Panel, what connections do I use for the two wires?
-
Please could you tell me how i can purchase the CFP708-4 C-Tec Fire panel with a key switch (cfp 708 - 4k) as your site does not give me the option although it is mentioned in the description?
Thank you
-
I have recently purchased a Menvier SD3 dialler from you to use with a Honeywell GD4 Accenta alarm system. My electrician has successfully configured the Accenta Alarm outputs to work correctly with the SD3 dialler (texting and calling fine), but is having some trouble workling out how to connect the SD3 outputs as required as the manual does not give a great deal of info. I understand that the outputs are open collector and therefore will need a suitable relay to provide a clean switch. Can you please recommend any particular relay modules (boards) for connection of the following outputs:
1 - To control heating system on/off
2 - Wired back to Accenta panel as Panic Alarm input trigger
3 - Wired back to Accenta panel as Set/Unset Key switch zone.
4 - Wired back to SD3 input as dial out for low temperature alert (does wiring back within SD3 panel still need a relay?)
Many thanks
-
I want to order the following items [Honeywell ADE Informa Speech Dialler &
ADE Honeywell Accenta Poly Gen4 with LCD Keypad & Bosch Blue Line ISM-BLP1-P Pet Friendly Blueline PIR Detector &
Honeywell AG8 / WB ActiveGuard External Siren & Secware 12v 7.0A/h Value Alarm Battery &
Honeywell Flexguard Glassbreak Detector], please could you tell me do Honeywell do smoke/fire detectors to add to the system ?
Also are all the components listed compatible?
Thanks
David
[Ticket Question] Gardtec 595
in Intruder Alarms
Posted
Hi i would like to buy the gardtec 595 with 5 motion detectors and a siren which should be high dbl? What is the price for the system and will you deliver it. i would like the fobs with it and the card to arm it and dis-arm it too, does this come with the kit? Can you give me full price with delivery?
Regards