-
Posts
100 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by accounts3
-
-
Hi Nigel
It is generally not the cost of the floodlights that you should consider, but the switching/control equipment, look at the GJD or the Voltek, they will both take more than one PIR, as for the brightness that will depend on the size of the bulb you fit, most come these days with 400Watt but if you wanted to you could fit a lower wattage.
Both companies are external lighting manufacturers, so the equipment will have IP ratings
Hope this helps you come to a decision
-
The default engineer code should be in the manual
-
No you would need to choose a release to suit your lock type.
-
It should not be used outside, you would need an external PIR, look at GJD or Voltek
-
is it an external PIR you are looking for??
-
We are not aware that this product is still available, sorry
-
Crow is no longer imported into the UK, and is it an internal or external PIR you are asking about
-
Yes it is possible, but we do not currently stock this item
-
6 core is the standard alarm cable, a pair for power, signal and tamper
-
Sorry you are correct we do not supply DSC products
-
The R1sec is a 12v rim release fail secure, the sizes are 158 x 25, seen at the door jam, the interior size is 32 across x 90 down. Hope that helps
-
If using end of line it is 6 if double pole 4
-
This 2nd handset can not be wireless, could you 'loop' wire it from the first handset??
-
can you confirm which BPT system you have, please
-
We will look into the possibility of doing this and get back to you
-
we are currently stocking very little of the Risco lines, sorry
-
To be precise you really need to measure what your system is drawing, or go for the maximum size the manufacturer recommends
-
These products are compatible, you can pay by card or bank transfer
-
The carriage charges are added to your order before you confirm , so you would be able to check the carriage before completing the order
-
These detectors are factory sealed, we would only recommend a replacement detector
-
The TLTXDCB is a battery powered detector only, it will need a least one receiver and floodlight, details of the receiver devices are shown with in the product description.
Hope this helps
-
The forum, is an open forum for other members to answer questions as and when they wish to, if they have knowledge and can reply. It also allows other installers to give opinions of equipment they have used and found to be worth while so there are unbaised opinions
-
Regretfully the 6 wire is obsolete now
-
I believe that there is a factory set zone for the entry exit route. the Garage PIR should be on an Intruder zone, although we would not recommend a PIR for a harsh environment like a garage, we would suggest you use a dual Tech to prevent false alarms.
If you have never fitted an alarm before try using the panel on a desk to see how the zones work, and to see that the panel is working correctly before you put it on the wall and wire anything into it. Then you will know that any zone problems are to do with the cabling etc, and be quite confident in your fault finding.
Your installation manual should be a great aid.
Hope this helps
[Ticket Question] Are these compatible?
in Intruder Alarms
Posted
You really should look at the Powermax bell, the AG^ would be compatible with hard wired, panels