Intruder Alarms

Proposed Gargage Alarm System Before placing a package order I just need to confirm that the Scantronic 9651EN-43 Panel will support 2 x remote extension speakers. I note it has 3 fully programmable outputs, I need a volt free relay / contact output (N/C healthy) Open Circuit on alarm condition for remote signalling to an existing Scantronic 9752 panel located in the house (this will then represent a seperate zone alarm, just like say a PIR in alarm condition going from N/C to open circuit) - please could you advise, order ready to go.

Hi there, I have a Yale Smartphone alarm system which works fine. I also have some extra CCTV cameras looking out the front and back of my house. I spend a lot of time working away and the house is fairly remote. I really want to be able to trigger a siren if I see someone snooping around the property at night, and I dont want to wait until someone has actually broken in! I use powerswitches that can be activated through my smartphone to turn on anything plugged in - lights etc (Yale Easy Fit Power Switch For Easy Fit). What I would like to do is plug in a very loud siren that can then be activated through my smartphone via one of these switches. Would any of the Klax…

Re products: ESP Quest 14m PIR & Honeywell Intellisense IS215T 12m PIR. Can you please confirm price of these items and which produce would be more suitable for residential use. Is the ESP as good a quality as the Honeywell PIR. Could you also recommend a suitable control box (alarm) and entry keypad that would be compatible with these PIRs. Thank you.

I have an Accenta Mini 8 G3 alarm system. I need a new key pad. The original one 8EP219 I am told is out of date and been replaced with 8EP416. Can I change the keypad to the new one with no problems or is there likely to be compatability issues?

In your opinion,which pet PIR tends to work the best and is more reliable for a wired system.I have looked at Bosch,Honeywell,Visonic and Texecon but info is not conclusive.Thanks

What is the minimum signal of digi gprs to be considered good

How do these watches operate pleae. I cannot see any buttons on side, do you press the pad which is the face of the watch? Thanks for your help

Does the powermax pro allow for partitions?

Does anyone know how many PIR's can be connected in series together in one zone of Scantronic 9448EUR-90?

Please can you advise which of the surface contacts you sell would be suitable for use in conjunction with the wired input of the 'Visonic MC-302e PG2' wireless magnetic contact.

I would like to fit an auto dialer with my system. The dialer I have chosen is the Honeywell ADE Informa Speech Dialler, the I have 4 different zones, what would be the best complete system to use with the dialer? I prefer a wiered system with panic button and anything else I should take into account? Any help would be much appriciated.

wanted to know if it was compatable with the older version

I have a few PowerMax questions that I hope you can help me with: - Which frequency band is PowerMax+ and PowerMaxPro operating at? - How much is it for the PowerMaxPro unit (incl. GSM and Powerlink) together with 2 x keyfobs, 2 x smoke detectors and 2 x motion detectors? - Is it possible to connect a Powerlink and GSM module to to the PowerMax+?

I am having trouble with the Wireless sounder (MCS-710) in both set, they suddenly stopped working. The squawk option doesn

i would like to buy a Elmdene Grade 2 Flush Contact do i need to get the one with purple resistors to be compatible with my risco system or would other resistor colors work thanks

Hey there alarm been working fine an come home to the keypad display as follows Accenta G4 RKP F131-01-111 No lights on lcd keypad and no response from keypad been working fine for a year can send pics if it helps

I am looking for a wireless alarm with 4 sensors, 2 door contacts, 2 keyfobs and an autodialer, can you let me know the cheapest one you do please.

Can you tell me if the Honeywell AC030 alarm button can be wired with just two wires? My current one which I need to replace only has two wires connected to it and the tamper function when removing the cover still works.

I am looking to get a security monitoring system were is no access for a landline (router) only to use GPS services. I was looking on connecting Visonic Powermax pro including Powerlink 2 unit with a sim card with data package. For a vision monitoring I want to connect a PTZ IP (axis???) outdoor dome camera which will be linked to the Powermax pro (how is it connected?) Could you please advice which camera will operate with this unit and how the system should work if the is only a mobile router (sim card with a data package) or is there some other solution how to connect this system and view it online?

could someone please recommend a backup ower supply suitable for the Risco Gardtec Eurosec CP8L

Please could you tell me the replacement for the Scantronic 4600r wireless burglar alarm system? I'm not sure if my control box is faulty (although there is a significant chance that this is the case) or if one of the window/door vipers is faulty, but my system is 13 years old, and I think it may need to be changed.

Do you sell them? Regards.

I have decided to upgrade my old PIRs, I have looked at the honeywell range but I think they are to big at 90mm long. Could you suggest a nice neat small pir that is not to intrusive for domestic use and of a good make. Is there a suitable pir for use in a conservorty.

We need to alarm our allotment warehouse. The insurance does not require an alarm but the committee fell we should spend a little money on a few basics. As a retired control electrician, just , I have been tasked. I require a mega external klaxon internal sounder 4 zone decent control panel 3 good vibration detecters and analyser 1 or 2 dual tech detecters cable Could you put a package together with price

Do you sell a Visonic Powermax Complete Kit?