Intruder Alarms

I want to order an ADE Honeywell Optima Compact Gen4 box, can you confirm that the Enersys 12v 1.2 A/h Battery is the correct type for this unit.

Today I purchased a copy of Wintex from yourselves. I have downloaded the Wintex zip file multiple times and it will not open. The Zip file is corrupt. I have attempted to open it in 7-zip and Winzip and neither of them will open it. They both say that the Wintex download is corrupt. Please advise as I need to get this open ASAP as I am trying to commission my alarm system.

Hi! I am interested in the above kit, will it conform to grade 2 EN50131?

have you any in stock that are compatible with the scantronic 500r - 2 pirs, 1 remote setting device, 1 door contact, 1 wired bell/siren external

Do you stock GS611, or GS711, or any similar shock sensor that works with analyser mod, preferably with integrated reed switch, in brown? All I see in the online store is in white.

wanted to know if it was compatable with the older version

Hello all, appreciate some help here, i have 4 pir sensors and a ADE Accenta Mini Gen4 panel, how should i wire the pir sensors in series? or should i wire each pir back to the panel? thanks for the advise!

Hi all Looking to purchase a wireless alarm for my house. 5pir's, 1 contact, panel. Would like to use existing wired bell box if possible. A good battery life would also be nice. Been looking at the infinite prime alarm, and the visonic powermax kit. The Scantronic 500r also looks ok Only problem is that the powermax plugs in with a plug in transformer, wouldn'y that be easy to defeat by a burglar? Any advice would be great Thanks Josh

Hi I need a full system. The main building requires 9 zones and there is an outbuilding within 15 yards of the main building which has mains power and requires 2 zones. I believe that for the outbuilding I need a wireless expander as I do not want to fit wireless sensors. The main building is suitable for a wired setup. I would appreciate some guidance on a suitable, cost effective control panel and accessories.

I am interested to the product Scantronic I-ON16 and Scantronic I-ON40 I wanted to know if it is possible selection the Italian language in the men

Could you please recommend a PIR (or more than one type) for a existing Scantronic 9452 wired Intruder alarm system. As the Installation manual and User guides for the 9452 dont show model numbers. Thank you

I'm looking to buy some visonic k980 wired pir's can't seem to find them on your site. Do you sell them? and at what price?

i have recieved the Sterling LCD keypad today it looks like i have been sent the latest LCD pad and my pad is approx 7yrs old. Is it compatible?

Hi! I bought a Visonic Powermax Plus last week (Thanks SecurityWarehouse !) 1. Is it possible to change Visonic Powermax Plus language ? 2. I've got two balconies : o 2 m x 3 m o 2 m x 6 m What is the best wireless protection for this balconies ? New Optex FTN-R/FTN-RAM ? Do you have other solutions ? Thanks, Jose.

i have respond/eclipse wireless system fitted in the house occasionally i have my van in the driveway would this "Risco Wisdom Wireless Shock Detector" be suitable to fit in the van? or can you recomend one that woud work with my alarm

I would like a wireless single PIR, single door, telephone dialing warning unit with small key pad for a 2rd floor two bed flat. Ideally I'd like an internal and external audible siren but would settle for either. Scantronic have been recommended. Any ideas on what to buy rom you please?

In your opinion,which pet PIR tends to work the best and is more reliable for a wired system.I have looked at Bosch,Honeywell,Visonic and Texecon but info is not conclusive.Thanks

I am looking to alarm my workshop. It consists of 3 rooms currently with plans to add another room in the future. There are 2 up and over doors, 1 standard access door and 1 double split opening door. 2 of these doors will be entry points with a keypad located close by. Only one of the rooms has a window. There is a cat flap in one of the doors for pet access. I have been looking on your website and come up with the following list of products for the system based around a Honeywell Accenta G4 Mini panel. I chose this panel because of price and expandability. Can you tell me if all the items on the list below are compatible ? Is there anything missing from the list that I …

Please let me know if Emergency Button MCT-220, is available with sounders

What battery is needed for the 8EP396A-UK?

I have the above as part of my alarm system. The external sounder does not seem to be operating although it seems to try. The strobe lights still flash when the system is set. I assume this is something to do with the piezo in the unit rather than a fuse. The unit is about 5 years old. If I buy the back plate will that come with everything I need to replace the sounder and is it likely that the fixings will line up or has the design been changed?

Hi I want to add a magnetic lock that released when the panel is unset. I see there are 2 outputs on the Premier 48 both that can take 1A but this seems alot. is it really ok to wire directly on to the pannel without needing a relay. Im thinking of running the SSP Mini Magnetic Lock unmonitored on the door conserned. if I do need a relay do you have a prepackaged one with power supply etc? Any help apprecated. Rob

Can anyone recomend an alarm system that will notify by text message for alarm triggers including set/unset (ie access to the premise) I currently mainly fit texecom products and have used voice diallers regularly but a client now wants that bit more! Any advice welcome Thanks

Hi, I\\\'m after a reliable wireless system, 5 zones down stairs one of which is a gargae, 1 zone upstairs but a pir would not be suitable in this area. The sounds to be wireless operated but mains powered. I\\\'d prefer a keypad activation & deactivation. Also is there a posibility it can notfiy you via text if your alarm is going off.

Does this come with a battery ?? If not, which one do I need to order for it. Which Remote keypad do I need to order for it.