Intruder Alarms

I have two wire LS 400 alarm in my garage. I need a couple of new PIR sensors. Do any of your sensors work on a two wire system?

I am looking to upgrade my scantronics 9800 alarm system to remote control arm and disarm. I want to keep my exiting pir's and door contact and outside siren/ strobe box. Also I would like to keep the option of the keypad as well. I was looking at the LGSIX/01 unit. Will this unit do what I want. Also do you do any other remote control units that will work with this unit.

Galaxy RSS software and Management Suite. Wants to know the difference.

The 6 stand-by batteries in the main panel are not being trickle charged. Replacing them with fully charged new ones (1.37V) gets the system working correctly in all respects but only for approx 3 hours. The cells are then down to 1.2V off-load. Have you any information regarding the charging circuit that could allow me to investigate further and possibly repair? Your website indicates that the Homelink 75 is “sold out”. If I need to purchase a replacement system can you please recommend a suitable model Having had further time to think, it would seem logical to assume that the panel’s internal power supply is not producing anything at all - not just the battery charg…

I wish to replace a Scantronic 9800 entry pad. Is there an easy replacement.

The Honeywell Galaxy alarm panel has a facility to send text message when alarm is triggered showing which sensors have been activated. If we connect a speech dialer will it disable this text service - To a private number.

Ticket question I have a powermax+ system installed about 3 years ago. One of the combined door and vibration switches has failed, please can you tell me what sensors are compatible as it is not possible to easliy determin this from teh descriptions. In particular the MCT-303, SD-304, MCT-302 and MCT-320

These PIRs require a power supply of min. 9V which I intend to draw from the Powermaster Central 12V auxiliary output, as it is backed up by a battery. The PIRs consume 19mA max, so 38 mA in total, which exceeds the Powermaster specs of 36 mA max for this auxiliary output. Can you suggest an alternative power output please, or do you think it's no problem to connect the PIRs as planned to the Central.

Hi, what pir would you recommend to cover windows inside a curtain, that wolud able to be set when a person is moving around the house. I do not want to fit inertia shock sensors on the windows.

I have a Scantronic I-ON 40 which is installed in a closet upstairs along with the wired keypad which has the LCD display and speaker (the one supplied with the control panel). I also have a i-rk01 wireless keypad downstairs for setting/unsetting the system upon entry/exit. Unfortunately, because the i-rk01 does not have a display or a speaker, it's pretty much useless as you can't hear or see what you're doing from downstairs. I am unable to relocate the wired keypad downstairs as I cannot run a cable, so is there an option to purchase a wireless keypad with a display or speaker? Or is there a separate wireless speaker that I can simply install in the closet downstairs a…

Hi, i bought a powermax plus alarm, and have just attached the external sounder to complete the system (risco novagard6), however, upon arming and disarming using the keyfob, the external sounder sounds for 1 second. this doesnt happen if i use the keypad on the pm+ though. Please could you point me in the right direction.

Hi, the last 2 kits I have ordered, ive got a problem with a white door contact, stuck on reed switch. and a Honeywell PIR that keeps flashing and not picking up and detection please can you advise many thanks

I can quick arm by pressing the Area button on the way out. I can also quick part arm by pressing eg 1 then Part or 2 then Part. This is all great and makes it very convenient to use. But.... If the system has been set to part arm overnight, someone comes downstairs and unarms it by typing user code. Then we leave the house and press Area to quick arm whole house. The system seems to "remember" that the last arming was part arm, and so even though we press Area for whole arm, it then sets a part arm. Pressing Reset a couple of times before Area seems to do the trick but is a pain when you forget. Maybe there is an option that I can't see in the prog…

Today I purchased a copy of Wintex from yourselves. I have downloaded the Wintex zip file multiple times and it will not open. The Zip file is corrupt. I have attempted to open it in 7-zip and Winzip and neither of them will open it. They both say that the Wintex download is corrupt. Please advise as I need to get this open ASAP as I am trying to commission my alarm system.

hi can you please tell me if you get full programming book with this panel. thanks

I have motion detectors Next K9 PG2. They create false alarm due to small animal walking in the area, How can I configure in order to eliminate these false alarms?

Purchased a 760ES and has the following problems; "The Siren is proper teached to the Control Unit with a high signal level. The Control Unit respont correctly to the two tamper switches wehnever they will be activated. The Siren dosen`t sound and flashes. It also dosen`t sounds when the Batterie will plug in. (referring to Info on Page 3 Installation Guide) It doesen`t sounds and flashes when the tamper switches will be activated." Can you confirm if the Siren would be faulty?

i`m looking to install an alarm into my 3 bedroom house. i`m going to fit my self and then get the electrician in to connect the power. i`ve been browsing through and quit like the sound of the veritas 8+. is this a good alarm and easy enough to fit. i have basic knowledge of electrics. any suggestions or comments would be grateful, thanks.

Will you be stocking the C079-2 RF portal? The only portal listed is the old one.

Could you please suggest correct replacesment battery for eurosec CPX control panel

I wonder if the Visonic Dual RS-232 Interface Module (Model: 9-100344) works with Powermaster 10?

1 x - Scantronic 9651EN-43 (9651 c/w 9943 rkp) 1 x - Secware Flex Tag Pack 10 1 x - Honeywell Reson8 Bell Box 1 x - Honeywell Reson8 Dummy Box 1 x - Secware KSB2 Sound Bomb 2, Quad Piezo Internal Sounder, 12VDC 7 x - Honeywell IS3012 PIR Motion Sensor with Pet-Immunity 2 x - SECWARE D20 Surface Contact 1 x - Scantronic 9941 LCD Keypad Im looking to purchase the above items, I have cable. will all this work together also the tags on both keypads?

Which key fob is the right one for the Galaxy keyprox keypad and what are the grey fobs for?

Hi, The remote keypad I have found that the number 7 is sticking in the depressed position. I have been trying to press and release repeatedly to see if it will free up. Any tips ?? Regards Jan

Can you please tell me are the "Honeywell Activ8 18m Quad Pet PIR's" are they 6 wire or 8 wire