Intruder Alarms

Can you provide visonic power master magnets to compliment the visonic shock/vibration sensor making it a shock/contact sensor?

Can someone please help me with my problem noted in my last post, i have been sitting next to my computer for over an hour just so I can pay for my order when i realy do have other things to attend to! # i dont know why you just can't have a real person answer your phones to sort this kind of stuff out.

Good morning I require 13, Honeywell IS3016A Grade 3 AM CPNI approved PIR detectors although online you are showing these items in stock can you please verify, as i require these ASAP thank you.

Bought a Galaxy GD-48 with touchcenter all is All is ok except the front LED’s do not operate. System is ready but no green led , when you set the system, the system sets but the red LED is not on. System reports no faults or trouble and touchcenter LED test works fine all LED’s operate.

Can anyone tell me how to stop the LED flashing (it is bothering me in the night) on a viper GLX? i have had the top off and i can see dip switches, also it only has a 4 wire connection? a 12v supply and the alarm wires.

How do you loop wire two Honeywell Intellisense IS215TCE PIRs into one zone when using a ADE Honeywell Accenta Metal Gen4 control panel?

Hi looking for some help, fitted new Accenta/Optima panel and LCD key pad every thing working great, but just cant set the quick set single key setting been all through the engineers programing and getting no where. Can any one please help? Thanks for looking

Hello, I'm french and my english is very poor... I'm a retired man living in a house and so I'm not a company. My house has 15 contacts of relays (one on each door and on each window), they had been placed during the construction of the house. The wires are in the wall and completely hidden. I'm looking for wired alarm with an ability of extension ( number of wired captors or also wireless captors). The centrale must be quite (no siren) to be dissimulated from the burglars. In my bedroom I want and keypad with a LCD that can indicate to me where the intrusion occurs. My job was in informatic system, so I will be happy to configure my alarm wit…

Hi Security Warehouse, I have been trying to re-commission my SD1+ after it being disconnected for several months. However, I cannot enter any 'user code' because buttons 1,2 and 3, (also A), do not respond when pressed. I would appreciate your help please. Regards, Chris Wills.

If Risco equipment is no longer going to be available then could you recommend & send info on other makes that can perform the functions of Eurosec CPX & Gardtec 595 including the vo-comm speech dialling.

http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=542 Is this graded? If so what grade?

Can someone please help Im trying to connect the AG6 external sounder to the ADE Gen 4 but on the connections manual that come with the sounder there is no ade gen4. I have connected it how I think it should go but i keep getting a tamper fault up ?? Thanks

I need to buy the Visonic Powermaster kit 10. In addition I would like to have two proximity tags. Can I get them and, if yes are they compatible with the kit?

Hi all... I am a sparky with a builder that would like an additional keypad adding to his Gardtec 591. The current keypad is a Contour with ACE - I assume this is a keyfob system. He only has one code, and the system was under contract with an alarm company by the previous owner, so... 1. Is his code likely to allow the integration of another keypad? 2. As he doesn't have any keyfobs (ACE) does he need another ACE compatible keypad - if not what pad would do? 3. Does the 591 allow factory resets? 4. Is a new system the better option? Many thanks, Simannjo

Hi, is question more to the techniacl support, about advice: I was wondering abou Texecom Panel CAA*0026 I'm wondering if that panel has got a dialler function, can it call or send message in case of alarm, if not maybe this one CAB-0001 or should buy dialler CGC 0001 and integrate with panel (Do I need any digi card) Regards Mariusz

Hi all, I'm new to the forum, it was recommended by a member on another forum. I was wondering if anyone has a .pdf copy of a veritas r8 installation manual for the pre-1999 models please? We have 2 veritas alarm systems on our house, one was installed in 1995 when the house was built, the 2nd was installed in 2007. I have a manual for the newer system but the older system I believe has different programming codes etc. Any help would be greatly appreciated. Andy

Looking for a PIR sensor that is normally open or both.

Can you please advise a suitable alarm system that is wireless but has a wired siren?

I have a flat which is fairly secure and unlikely to be broken into. However for £200 or so it seems a good idea to fit an alarm. I have been considering the Yale Premium and was looking at a forum on http://www.diynot.com/forums/viewtopic.php?t=255745&start=30. One contributor was not so keen on the Yale alarm and stated: ?If you really want a Yale system, try this instead. http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=1015 Similar price and a graded product. http://www.securitywarehouse.co.uk/catalog/index.php?main_page=product_info&products_id=2202 I have looked at your site but find it difficult to…

Hi I'm looking for a wireless intruder alarm for a one floor house. It has to include - 6 wireless PIR detectors - 1 wireless external sounder - GSM/GPRS notification capability. Right now i'm investigating the rokonet wisdom and the visonic powermax. Questions 1- Which one do you think would be the most suitable system? You can refer other systems 2- I didn't find any GSM/GPRS adaptor for the rokonet wisdom in your site. The Wisdom panel refers the capability, is it already included? If not which module should be used? Thanks Nuno

I have purchased a Scantronic ion-40 control panel and a Pyronix Deltabell E, but I'm having a problem getting the bell to trigger. I have attempted to follow the wiring diagrams supplied with the panel and the bell, but they don't match up 100% and unfortunately I cannot seem to get the bell to trigger at all Deltabell Connections: T T ENG HOLD STB BELL +12V -12V ION-40 Panel Connections: AUX 0V AUX 12V OUTPUT 1: NO OUTPUT 1: C OUTPUT 1: NC OUTPUT 2: NO OUTPUT 2: C OUTPUT 2: NC TR

Hi, I'm looking to purchase three of these detectors: Bosch Blue Line ISM-BLD1-P Pet Friendly TriTech Detector I see from your site and the spec sheet that they are manufactured in three different frequencies. If I order three, are you able to supply three different frequencies? Three different frequencies would be ideal as the location of each detector may mean that their coverage may overlap. I'm looking to place my order for these and seven other PIRs ASAP as I'm due to start installation on Friday. Many thanks in advance, Neil.

i've been looking at these keypads here: http://www.securitywarehouse.co.uk/catalog/texecom-premier-elite-keypad-p-2481.html You talk about SMK and FMK, is this kit suitable for either surface or flush mounting?

The wiring diagram suggests that for multiple keypads, the wiring should be serial i.e. from alarm panel into the first keypad then onto the second. My question is can I wire each keypad back to the alarm panel independantly (in start wiring), e.g. the comms connection at the alarm panel has two wires comming from it, one to the first keypad and one to the second keypad.

Is the powermax PRO in stock the new version with new motherboard and more memory and true split partitions?