Intruder Alarms

Hi, I had an alarm system and we started having problems with our bell box (kept going off because it was too close to the boiler flue). I decided to replace the bell box and bought a Texecom Odyssey 1E. We've fitted the bellbox but it won't seem to work with my existing system. I'm not sure but it may be that its not compatable with the panel/key pad. I could do with knowing what panel/keypad would work with this bell box, how much they cost and whether you stock such an item. Thanks

I have the above as part of my alarm system. The external sounder does not seem to be operating although it seems to try. The strobe lights still flash when the system is set. I assume this is something to do with the piezo in the unit rather than a fuse. The unit is about 5 years old. If I buy the back plate will that come with everything I need to replace the sounder and is it likely that the fixings will line up or has the design been changed?

I have a omnicron 7000 and i wish to change the controll panal i was wondering if you had a panal that would be able to be put in its place and i could just rewire my sensers back in to

Hi can you help, I have a client with a alarm system, th only information we can find is its a , RS 125, I seem to remember that jSB made some of these alarms, its about 16 years old, we need a new RKP for it, 7702-1762 VERSION 1-5 if you follow this link it brings up the manual /mcalarms.co.uk/manuals/eb2160715c71a5288868dea766782281_RS125UserManual.pdf can you tell ne if its availble and cost

Maybe unwisely, I have bought a used SD1+ Speech Dialler to replace a twelve year old model that failed to respond to all the helpful advice you gave me back in February. I have carried out a factory restart, as described in the manual, and have created a 'NEWCODE'. However, when I try to program telephone numbers from 'READY' and press'ENT', the LCD still shows 'READY'! Again from 'READY', if I press 'O' 'CLEARBY' is indicated. But pressing 'B', 'CLEARBY' still remains on the LCD! Please can you help me!

I got a speech dialler a few months ago been, working well untill a round 2 weeks ago. it's stopped dialling out or reciving calls. I have plenty of credit phone, and the sim card works in a mobile phone. the antenna is ok no damage that I can see. do you have any ideas on what the problem is?

Is the Secware 12v 2.2A/h Value Alarm Battery (product number 70/118) suitable for the above control panel? Is it normal for this battery to require replacing after 5 years?

I bought the cable mentioned in the subject line this week and have the following technical question: Can the cable be used as telephone cable, please? Any information would be most helpful.

We moved into our house previously without pets but with one of the above alarm panels. I need to replace three PIR with pet friendly ones. You advertise the Scantronic 430, is this compatible with the 9450 panel. Also I wanted to install a dialler but it seems that you are out of stock of all diallers. If there is one that is compatible with my control panel could you please let me know. Also I would like a clue as to how to wire up the dialler to my panel.

I am considering buying and installing the following home security kit with some additions at the bottom*: 1 Honeywell Accenta Gen4 Mini Control Panel (8SP399A) 1 Honeywell Accenta Gen4 LCD keypad 4 Bosch Blueline Pet Friendly 12m PIR Movement detectors 1 Honeywell AG6 SAB and Cover (Blue Strobe) 1 100m 6 core Intruder Alarm Cable 1 Secware Value 2.1 A/h Battery 1 Surface Door Contact *1 Honeywell ADE Informa Speech Dialler *1 Honeywell AG6/WH Dummy Bell Box *1 Elmdene QSC Door surface contact Can you please ensure that all parts (*) are compatible to the kit especially the speech dialler. Is it complicated to install? Do you supply installation manuals wi…

Can Honeywell easy set fobs be used with ADE Honeywell Accenta Mini Gen4 system..alone . or is some extra sensor / equipment needed

I'm interested to buy from you a complete set of alarm system for my house. i want it to consist from a good expendable control panel so i chose the scantronics ion40. I'm building a new house so i did all the provisions needed for wired installation. my system will consists of: 10 magnetic contacts for doors/windows 5 passive infrared detectors 2 smoke detectors 3 keypads 1 internal and 1 external siren The thing is that i'll try to install it myself so i'll need help as much as possible. -when i buy the ion40 system it comes with 1 keypad already and i'll have to buy 2 more or is something different so i must buy 3? -i read the specs of ion40 and is only sup…

Hi - just wondering if the G4 LED keypads for the Accenta are compatible with the G3 RKPs/systems? Also, do you sell these G4 RKPs seperately?

Having just been burgled I have purchased a KX15DATM pir from you to replace a failing unit from a different manufacturer. The existing unit is connected via 6 cables - 2x Tamper, 2x Relay and 2x 12v. Do you know what connectors the cables need to be screwed into on the KX15 please? I may also have to change some of the dip switches? The control panel is an Accenta 8.

My system is showing a fault "Telecommand Batt Low" which refers to the 723r Telecmmand remote setting device. I have changed the batteries in the 3 telecommand devices I have however the system continues to show the error. I have moved the system into Engineer mode and it will not now exit. Going through the command set to exit Engineer Mode ie 99 tick, the systems goes through the "checking system bus" bit ok and after agreeing to "exit eng" the unit starts the "Checking System" routine and then flags up the "Telecommand Batt Low" problem again and will exit the Engineer Mode. How do I get out of this, as I say I have put new batteries in the remotes but this does not …

I wish to replace a Scantronic 9800 entry pad. Is there an easy replacement.

I am considering replacing my current alarm system, it has been installed for 20 years and it doesn't suit our needs anymore. I am looking for a recomendation for a system with the following requirements: Blank Control Panel 2 x Remote Keypads 5 x PIR sensors 2 X Door Contacts 1 x Smoke Detector 1 x external bell box I intend to replace batteries and cabling

We have an old Scantronic 500r. Reading the specs for an additional PIR (534r) and Vibe sensor (520r) suggests different possible frequencies. I understand the UK is 433 MHz, but the spec for the 534r shows "520REUR-50" as the model number. Given other info on your website I'm worried that the "EUR" and "UK" models are different frequencies. How ca nI check what ours operates at and can we specify that when ordering?

I have a Scantronic I-ON 40 which is installed in a closet upstairs along with the wired keypad which has the LCD display and speaker (the one supplied with the control panel). I also have a i-rk01 wireless keypad downstairs for setting/unsetting the system upon entry/exit. Unfortunately, because the i-rk01 does not have a display or a speaker, it's pretty much useless as you can't hear or see what you're doing from downstairs. I am unable to relocate the wired keypad downstairs as I cannot run a cable, so is there an option to purchase a wireless keypad with a display or speaker? Or is there a separate wireless speaker that I can simply install in the closet downstairs a…

Hi, how is this alarm armed and disarmed? Does the alarm come with all of the parts to mount it to a wall? How loud is the alarm? We have an external light which sometimes comes on at night if our neighbour walks into his garden, would this light coming on at night time trigger the alarm? i look forward to hearing from you.

I have just purchased today from you this item could you let me know if it has an operating Frequency: 433MHz at 200KHz bandwidth

Which remote key fobs will I require with this control panel - ADE Honeywell Accenta Mini Gen4 with LED Keypad? Also, which backup battery will suffice for the 8SP400A?

Does this come with a battery ?? If not, which one do I need to order for it. Which Remote keypad do I need to order for it.

Proposed Gargage Alarm System Before placing a package order I just need to confirm that the Scantronic 9651EN-43 Panel will support 2 x remote extension speakers. I note it has 3 fully programmable outputs, I need a volt free relay / contact output (N/C healthy) Open Circuit on alarm condition for remote signalling to an existing Scantronic 9752 panel located in the house (this will then represent a seperate zone alarm, just like say a PIR in alarm condition going from N/C to open circuit) - please could you advise, order ready to go.

I have a Scantronic 9751 system with a faulty transformer and 9 year old battery that I am looking for replacements for. Is this something you can help with? Many thanks,