kyrusdemnati Posted May 4, 2019 Share Posted May 4, 2019 Can anyone please advise? i have checked manual/interface its daunting i just need to know the basics please, everything is already in place - but .i changed my front door and the door sensor caused an issue/tamper and the alarm wouldnt set, and i made the mistake of resetting the device so i have lost all the devices from the memory thanks Quote Link to comment Share on other sites More sharing options...
Secware_Tech6 Posted May 5, 2019 Share Posted May 5, 2019 What do you want to know? Quote Link to comment Share on other sites More sharing options...
kyrusdemnati Posted May 5, 2019 Author Share Posted May 5, 2019 it looks like my door sensor is damaged, i cant open the device - screw seems damaged so i can't repair and the backplate is broken slightly (i had my door changed) i have managed to pair my 4 pir motion sensors again all set for (zone A) kitchen, lounge, upstairs landing, bedroom - will add my front door (awaiting replacement sensor) I want to also set a night alarm (Zone b for downstairs which would be (kitchen) (lounge) (and front door (awaiting replacement sensor) is it a simple process to create a zone b? my questions are going forward. 1) i am going to order a new door sensor - is this quite straight forward to install? this would need to be configured as part of zone a and zone b 2) my bellbox is also not on the panel and needs repairing, do i need to get a ladder and resync or is there an easier way? does this have a similar pairing button that is found on the sensors which i press to sync, but i use learning devices bell option on the enforcer settngs right? 3) if i buy a Pyronix Enforcer Keyfob-WE - does this only work within the proximity of my home? I would just want to use this to set alarm/disarm, set zone a, set zone b, and panic alarm... thank you Quote Link to comment Share on other sites More sharing options...
Secware_Tech6 Posted May 6, 2019 Share Posted May 6, 2019 1 yes just add it and program as required 2 assuming wireless Bell yes 3 yes only when in range Quote Link to comment Share on other sites More sharing options...
kyrusdemnati Posted May 7, 2019 Author Share Posted May 7, 2019 Hi mate ok thanks so at the moment I have set up to motion sensors , kitchen and lounge I tested it and it works with the alarm triggering from the unit panel. (Still need to get a ladder and do bell box) but when I try and set the alarm again it brings up a kitchen error alert and it cannot set alarm . How do I reset this ... (my test was via the kitchen motion sensor ) What options do I need to select for each my sensors too, I’m not sure if I have done it right . What do I need to set as the type type Motion sensor 1 kitchen Intruder 06 motion sensor 2 lounge Intruder 06 (My other motions sensors will be ) upstairs landing sensor what input type ? bedroom sensor what input type ? Front Door sensor (this will be my entrance and exit to the house what input type do i need ? I also will be adding a 2nd door sensor to my patio door at the back house what input type do I need to set this too ? Thanks Quote Link to comment Share on other sites More sharing options...
Secware_Tech6 Posted May 8, 2019 Share Posted May 8, 2019 I'd suggest you start a new topic per question. It's getting difficult to follow? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.