smash0007 Posted September 15, 2009 Share Posted September 15, 2009 hi i had a scantronic 9448+ style installed a number of years ago which has worked perfectly, but since the main fuse was knocked, the mains light on the panel does not illuminate and the panel does not power up. However, there is now a couple of lights on behind the keypad, which had all gone off after the main fuse was knocked out. Also, after the main fuse was knocked out there was a few weak noises from the panel...these have since stopped. Even trying to key in our code, there is no audible sound or any changes to the state of lifelessness. Can you advise us on how to remedy this problem, or suggest a 'like for like' replacement? Yours smash0007 Quote Link to comment Share on other sites More sharing options...
Secware Posted September 16, 2009 Share Posted September 16, 2009 Hi Please could you raise a ticket for me on the web, so I can pass it on to our Technical department for the guys to have a look at for you Regards Elaine Quote Link to comment Share on other sites More sharing options...
ravis94 Posted September 16, 2009 Share Posted September 16, 2009 have you checked the main fuse in the actual control panele end station??(big scantronic box) There is a mains fuse on the PCB. It should be next to two other fuses.Also remove the battery and get a replacement.If not, change all the fuses and see if it will power up on a battery Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.