secware3
-
Posts
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by secware3
-
-
Pre-Order Enquiry - Decoy Bell Box Do you sell a Decoy Burglar Alarm Bell Box that includes a mains powered light (such as a faint blue flashing strip light) that is always active ... and mimics an actual bell box. If so, please could you let me know the part number etc. If not, I would be very grateful for any suggestions ... such as modifying a standard decoy box? btw. Does 'Sigma' still exist or taken over? I installed a sigma system years ago and have tried to buy similar kit. Many thanks for your help.
-
We have 4 PIRs on one zone, and it would be impossible to establish which PIR was triggered without latching LEDs. Without latching, we would need a new panel with at least 3 more zones, and to re-wire these PIRs. Surely, the 7th wire on PIRs is for LED latching, even though it has differing labels such as walk test?
-
his purchase is to replace an Optex Wonderex EX35 PIR. The existing wires may not be long enough to reach the top nor even the middle of the PIR unit, so the terminals need to be at the bottom of the unit. The unit also needs a 7th terminal for alarm latching for the unit LED show whether it was that PIR that triggered the alarm. The PIR is situated in a living room of about 3 by 3.5 metres. Consequently, the PIR need not be very high tech - a suitable alternative will have the terminals at the bottom and a 7th terminal for the LED
-
Hi can I install these detectors to a galaxy panel grade 3
-
I keep getting a tamper alarm, what are the common reasons for this happening?
Risco Gardtec G-Tag Contour Keypad & PA(595 & 800 Series)4 Wire https://www.securitywarehouse.co.uk/catalog/intruder-alarm-equipment-c-36/security-control-panels-c-36_102/control-panels-all-c-36_102_41/risco-gardtec-gtag-contour-keypad-pa595-800-series4-wire-p-1963.html
Thank you
-
I was wondering whether you have a substitute for the FMX-DT-X8?This item is to replace an existing bottom entry Optrex PIR, and I am worried about the length of the wires that the requirements are (1) bottom cable entry (2) wire joiner preferably at bottom on unit (3) 7 wires, including the LED latch wire (4) medium sized room about 3.5 metres square.Would have a such a substitute PIR?
-
The Dimension panels can be upgraded no need to replace it, however for the High Resistance issue a engineer would have to visit the site and do some troubleshooting.
-
Hi
This kind of depends on intended use.
If it's for engineers to install on their laptop and connect directly to panels onsite then it doesn't matter, can be installed on as many machines as you want.
If you are looking to setup a small support team for instance with everybody having remote access to the panels then you need R057 which needs a dongle per machine (including the server). You can install that on as many machines as you have dongles for. -
How many PCs can I put the software on?
-
Is your Pyronix Full HD Wi-Fi Camera 7 PIR compatible with Eaton Secure Connect System . If so due you also have a external Wi-Fi Camera that does the same?
-
I have a Rokonet Wisdom domestic security system which was installed 2007 and when activated notifies 3 mobile phone numbers. The system was operated on 'Analogue' system but my phone has been switched to VOIP Can you please advise how to update the Wisdom alarm to operate over fibre or VOIP signal I Look forward to hearing from you
-
Optex AX 70-TN has twin beams 20m range, single channel detector.
and a Optex SL 200QDP has quad beams with range if 60m, 4 selectable channels and adjustable beam power
-
please advise me of the differences between an Optex AX 70-TN and a Optex SL 200QDP. The proposed location is no more than 20 metres. Does the more expensive unit have a technical advantage?
-
Hi, I am looking for a reliable replacement for an SEC-TFT-19 CCTV Monitor for my security camera home system. It is 12v , colour and has been quite reliable but recently packed up. Would you recommend this 19" TFT model as a direct replacement and does it come with a transformer.
Many thanks
-
Hello , I have the ade simple set unit, with the older fobs, which I can see are obsolete now. Your alternative link takes me to these items. Can I check that they work directly, or do I need to change the simple set proximity unit ?
-
Thanks for replying.
System info is Galaxy G2 - 12, V1.44. I've no idea if that is old or not. Was an ADT install and maintained so could be running ADT custom firmware.
I may have found the issue as talking to Honeywell and it sort of clarifies poor information in the Install Information.
For the info / help to others then I set the system up as:
User 01 : code - LVL3 (supposedly manager level)
User 02 : code - LVL3 (supposedly manager level)
Master : code
Engineer : code
So after the AC Power Fail I entered User 01, Events, Enter, ESC to be told Manager Reset Required. But LVL3 is supposed to be Manager authorised.
Thinking OK this may be wanting another 'Manager / LVL3' instead I did User 02, Events, Enter, ESC to be told Manager Reset Required.
Honeywell advised that LVL3 is supposed to be Manager as well but some Events will require MASTER.
Clearly IMHO having designed kit (military & commercial and written the install, test, service and user manuals) the Honeywell G2 Install manual does not clearly define the differences of Manager vs Master. If the AC fail event required MASTER to clear it should not say Manager on the keypad / console. -
Due to the age of this sounder, the manufacturer no longer manufacture replacement battery packs.
It would be more suitable to replace the sounder.
-
Hi. Do you know if there is a known bug in Galaxy G2 20 alarm such that after an AC Fail it can only be reset by Engineer. Mine offers Manager Rest Required but this does not work and I have to use the Engineer login. Checked the forum but could not find any relevant info. Thanks in advance.
-
What battery do I need in the flash guard sounder 42-306823. thank you
-
I need w wireless camera that you can watch on a tv
-
Hi. I have the CP7 which doesn’t have the LCD display. Can I replace this with the newer CP8 keypad whilst retaining the old CP7 main unit? Thanks in advance
-
Veritas Excel CFE-0001 has a telephone connection ? I would like to be notified by telephone when the alarm is triggered
-
How do the old buttons come out of the veritas 8 panel so I can put the new set in. I was hoping it would part from the front so I could just change number membrane, but not sure, thanks
-
hi i have just purchased a new house, it has this alarm system fitted ADE LOGIC SIX it is live and the passives appear to be working however i am unable to find a key pad, or key fob, to set the alarm , do you supply spare key fobs ? and are they easy to pair with the alarm fitted in my house ? any information would be a great help
[Ticket Question] CFD-0009
in Intruder Alarms
Posted
Texecom Veritas R8 Plus Panel with LED Remote Keypad https://www.securitywarehouse.co.uk/catalog/intruder-alarm-equipment-c-36/security-control-panels-c-36_102/control-panels-all-c-36_102_41/texecom-veritas-r8-plus-panel-with-led-remote-keypad-p-323.html
Does this item come with the necessary hardware to act as an autodialler