Hi I am having a similar issue where I am not sure what I am doing wrong. I decided to go for the Gen4 as it appeared to be a more simple solution to upgrade my existing BG DSC alarm system. I am linking 6 sensors (1 magnetic door and 5 PIR) that where on the existing system. I have connected the 13v and 0v wires together as per the previous alarm and the wiring diagram which left me with 2 other wires for each sensor (as the existing sensors don't appear to have tamper connections).
Under the above configuration, the walk test appears not to detect the connected sensors triggering. All the sensors seem to be identified as zones 7 and 8 both have 1's listed and also I have tried to remove them all and just leave the magnetic door sensor but still no luck, just a 0.
The only issues I can think of are:
- The sensors I have are not compatible? (To little resistance...)
- This is something to do with the tamper setting, currently it still has the loop left in as I have no wires connected here
- It is to do with the way I connected the Bell Box as the existing one only had 4 wires (but this appears to work when I first turn the unit on, 13v = 13v, 0v = 0v, Stobe = -Strobe and Aux = 0v)
Any help would be appreciated.