Secware
-
Posts
68 -
Joined
-
Last visited
-
Days Won
16
Content Type
Profiles
Forums
Events
Posts posted by Secware
-
-
Hello.
Do you have an Intellisense IQ260 replacement/equivalent please.
I have one in my garage, after doing some refurbishment to the building I was thinking of installing an additional sensor as a single one can no longer cover the area.
That is if 2 pir's be installed in the same zone/room? an 8 core cable is installed however only 1 core remains unused.
If 2 can be used on same cable maybe better to buy two identical detectors and do away with the IQ260?
Thank you. -
We are looking to put together a scaffold alarm using dual beam sensors possibly 6 sets with a control panel and auto dialler. What can you suggest please?
-
Hi, for the NV-214A-M device, do I need a device at each end of the twisted pair, so that the video feed from a remote camera can be fed into the BNC connector on a Samsung SRD873A ?
-
Some questions, I looking for 4 pce of camera and one video recorder how can handle those cameras to record videos and save them, recording in loop so the oldest file will be deleted when the disc is full.
The camera should be activated by some movement, it would be fine if the camera have some zoom lens so I can use cameras with good pic up to 20-30m, the resolution of image should be acceptable so you can see the sign of car registration on 20m. Please can you help me to fix some package with all things I need for that, and the system should be used in Sweden.
I wounder if it's possible and compatibly to bay and use 4 pce of "Secware Pro Bullet IR 700TVL effio-E Camera with 2.8-12mm MP Len" together with "Secware Pro 960H 4 Channel DVR" and let each camera be activated of an external movement detector. So if I mounting 4 outdoor movement detector for all cameras and if one of the detectors will be activated all camera will start to recording video for a time.
I work as electrician so I have no problem to build some system with some relays and so on.
Please can you see on this and help me to get some good offer on all devices I need to have for my project. -
We're looking at a comms installation at an isolated site, which will also require an intruder alarm. There will be no landline phone but we anticipate installaing a 4G router which will provide both an Internet connection (WiFi and hardwired) and a phone line. The phone line will be derived from the cellular connection and we envisage using a UPS to keep the equipment going in the event of a power outage. The preference is for something that can alert the owner to an intrusion by dialling a series of phone numbers or by using SMS rather than by using a conventional. communcator and monitoring service. Remote Web maintenance is a requirement. Preference is for a system that is not entirely wireless.
I'd be grateful if you could suggest equipment that we should consider to meet the above requirement. -
Hi, do you stock a PIR that uses a DC voltage and can be installed outdoors? Thanks.
-
Hi, I purchased a Scantronic 9651 from you in July. I have now noticed that in Eng Mode all IR and Panel tampers are taken out (as expected) allowing me to access the components, but having just taken the external siren cover off the bell rang immediately. It may be that this is correct but I was not expecting this (other panels I have installed eliminate all tampers in Eng Mode, inc the Bell). I would appreciate it if you could advice me if this is correct. Also, if it is correct is there a way to avoid the bell going off during maintenance of the system.
For your info I have fitted a Pyronix Belle to the 9651 panel as below.
Belle 9651
B- 0v
B+ 12v
BA OP1 (Bell)
STB OP2 (Strobe-)
BT TR
TF No Connection
I appreciate your help -
Hi
All information is always sent to the cloud. The cloud will or redirect it by email to the client which is free or redirect it as a text message which has a cost.
SMS notification is basically a 2 years contract during which all the logs are send (if not connected to TC20E) to the client.
There is no sim card required. -
Hi, I'm looking at purchasing cameras in order to carry out traffic surveys. They will need to have a minimum 7 day battery life and be mountable to lamp columns.?
-
Hi, I am interested in the Visonic Power master alarm to install in a carehome I look after. I have seen one of these systems before and it seems to work well.
I need the system to have two door contacts, the most important feature the home is looking for is the door chime feature so I need this to be quite loud, is it?
The alarm feature will be loud enough, they always are, this will only be set at night with no PIR required as there will be movement in the house, so still just the door sensors.
I have fitted a challenger model before and the chime function was nowhere near loud enough so I am hoping this is better, it did seem to be on the one I seen. If not, is there an option of another internal sounder?
An external flashing sounder is not required. -
I bought Honeywell DT8012F5 and IS3012 sensors with Pet immunity but when my cat with (5Kgs) jumps to a table or to a sofa or when it walk on the table, it sets off the sensor. It already happened with both types of sensors in different rooms.
Do you know why this is happening with Pet immunity sensors? How can I solve this? -
Hi!
I have previously purchased
Visonic PowerMaster 10 Panel with Visonic PowerG KP-160 White Touch Screen Arming Station c/wProx. I wonder which Wireless Keyfob Transmitter would work with the current setup so that I could control the alarm from a distance? -
Please find the following comments from the manufacturer;
1) The Next PG2 K9 motion sensor come with 2 lens, what is the lens that is Pet tolerant?
The Lens with the shading will be the pet lens.
2) I would like to buy a RS232 module to connect to the powermaster using the "Remote Programmer PC Software". Two questions :
You need the USB Programming Kit the RS232 module is the older version.
2.a) What is the RS232 module that it's compatible with the powermaster 30?
Again you need the USB Programing kit.
2. Do you supply also the "Remote Programmer PC Software" ?'
You need to register as an installer on Visonics website, then you can download the SW -
Hi,
Just bought from you a visonic powermaster 30 kit with some additional modules and sensores and have the following questions :
1) The Next PG2 K9 motion sensor come with 2 lens, what is the lens that is Pet tolerant?
2) I would like to buy a RS232 module to connect to the powermaster using the "Remote Programmer PC Software". Two questions :
2.a) What is the RS232 module that it's compatible with the powermaster 30?
2.Do you supply also the "Remote Programmer PC Software" ?-
1
-
-
I have recently purchased a Secware Eco 2 Mega Pixel AHD Bullet Camera with IR from yourself and I'm having trouble getting it to work on my existing system. This camera is a replay any camera as the Ir has failed. I now suspect the camera may not be compatible with my current recorder could you please advise if I'm correct. The recorder is a Hikvision ds-7204hvi-sh
-
I have followed the data sheet
1. Press and hold . The keyfob flashes
once and after a while starts to light
continuously.
2. Keep pressed while pressing xtimes
according to the table below.
3. Then release to end configuration
mode.
4. As confirmation, the LED flashes the
same number of times as you pressed
the button.
The default mode is 5: No lock - unlock
possible, no one-button PANIC possible,
both pairs are 868MHz
Battery replacement -
what do you mean Have you got the right frequency how would I know this ??
I bought same model as I had before ? -
Thank you for the supply of the new remote keypad for my Visonic PowerMaster 10
I have registered the keypad without any problem.
I started to register the prox tags but made a mistake, so deleted them. When I check the system, it clearly states 'none registered'
When I try to re-add a tag, I now get the message "no free location".
I removed the batteries from the keypad then I 'disconnected' the keypad from the main unit then re-registered the keypad with the main unit, hoping this would 'clear' any issues, but I still get the same message when trying to register a prox tag: "no free location"
If I can't register any tags, the remote pad isn't a lot of use to me.
Please help!
Regards -
i have bought Jablatron Freewave 4 Button wireless keyfob - white (RC-86-W) to replace old ones however when I try to programme them they are not working
?
can you give any help on this matter? -
On 6/4/16 I purchased an Accenta mini Gen4 and several other items from you to update an old alarm system I had in the house.
Installed the above and all worked fine. Yesterday I went to replace an old PIR and stupidly I forgot to power down the system first. Afterwards neither of RKP's or any of the PIR's worked, however the bell did. There is power to the PCB as the red light is on.
Is there anything I could check, or is it liable to be the end of the PCB?
Yours hopefully -
Were looking to upgrade our currant alarm system Accenta Mini Gen4 (8 Zone) with and FX050
Were needing 15 wired Zones, with the ability to expand.
Base Alarm System
C006-L-E2 Galaxy Flex FX050 Large box, 2A
C072 Galaxy RIO (additional 8 fully programmable zones making 28 zones, available zones 20 wired/8 wireless)
TS300 Dual Temperature Sensor (server Room)
PR-11B Takex 11m Reflector Active Beam External (big windows)
Unclear if these are needed or not
R057-CD-DG Remote Servicing Suite with USB dongle & client/server version ?
R058-CD-DG User Management Suite (UMS) with USB dongle ?
A083-00-01* Ethernet module/Internet Modulenotes:
* Available on Flex panels with firmware version 3.0 onward
possible to advise if the above makes scene both financially and technically. -
I bought a CQR SC570/WH Surface Contact (SC570/WH/MD/MULTI/G3) from your shop.
Installation instructions are a bit unclear : to wire this contact as a single detector, it is written that one link from each row (Tamper and Switch) must be cut. But just before, they wrote that "at least" one link from each row must be cut. And there is a table which lists Texecom (I have a Texecom Premier 24 control panel) in column B.
So, now I'm wondering: should I cut only column B links or should I cut all links except column B? -
I want to use the MCR-304 single receiver and would like to know if I can use the MCT-124 hand held transmitter for a panic button.
Or can you surges something similar. -
Hi, thinking of using the Texecom Speech and Text dialler with an Aico Ei428 relay on a smoke alarm system, the not received relay yet, but sales literature of relay says it has Volt free relay contacts, can be configured to switch up to 230V, would this dialler work with it? Any assistance would be greatly appreciated. thanks
?
[Ticket Question] Honeywell Pir
in Intruder Alarms
Posted
Hi,
the last 2 kits I have ordered, ive got a problem with a white door contact, stuck on reed switch. and a Honeywell PIR that keeps flashing and not picking up and detection
please can you advise
many thanks