lee1

this is so u can label the zex (zone expander) if u have more than 1. hope this helps u good luck

sounds 2 me like u need a eurosec cpx this panel very easy 2 install and has a built in speech dialler and is a very reliable alarm u can also buy a wireless receiver and put 8 wireless zones on it job done

yeah good idea im sure that will resolve ur problem!!

i think it is the panel iv had a very similar problem before when cables were cut if all power is disconnected from the panel and it still measures 17 v this will confirm a faulty panel. charge the dimwit who cut ur cables lol good luck

it sounds 2 me like the panel is faulty it should not be putting out 17 v its normally around 13.8 disconnect all aux power and measure again!!!!!! good luck

I would use a eurosec cpx panel very easy 2 use they have a built in digi (phone dialler) and u can also put a wireless expander on there so u will only have 2 run 2 cables 1 for the bell and 1 for the keypad also u can put wireless fobs on the system so u can set ur house like u lock ur car very reliable and easy 2 use ! ( i am a alarm engineer my company use these every day in domestics 99.9%) reliable batterys in detectors last up 2 2 years!

the eurosec cpx is a good panel 2 use.I would put the panel in the house eg loft, airing cupboard run the s.a.b outside and put the keypad somewhere easily axcesible get urself a wireless zone expander (risco) and u can put up 2 8 wireless zones on there including smoke detecters. very reliable wireless system and batterys last anything up to 2 years. the cpx has a built in speach dialler just connect the phone line turn the vocomm on and put ur numbers in (up 2 4) very easy when the alarm has an activation it will call u telling u which zone has been activated. hope my reply has helped u good luck!!!