Intruder Alarms

We're looking at a comms installation at an isolated site, which will also require an intruder alarm. There will be no landline phone but we anticipate installaing a 4G router which will provide both an Internet connection (WiFi and hardwired) and a phone line. The phone line will be derived from the cellular connection and we envisage using a UPS to keep the equipment going in the event of a power outage. The preference is for something that can alert the owner to an intrusion by dialling a series of phone numbers or by using SMS rather than by using a conventional. communcator and monitoring service. Remote Web maintenance is a requirement. Preference is for a system th…

hi I was just wondering what control panel I would need to buy with the Klaxon 127Db 240v High Output Master Blaster Siren (12v Relay)I will also need 2 P.I.R's. thanks in advance.

1 x - Scantronic 9651EN-43 (9651 c/w 9943 rkp) 1 x - Secware Flex Tag Pack 10 1 x - Honeywell Reson8 Bell Box 1 x - Honeywell Reson8 Dummy Box 1 x - Secware KSB2 Sound Bomb 2, Quad Piezo Internal Sounder, 12VDC 7 x - Honeywell IS3012 PIR Motion Sensor with Pet-Immunity 2 x - SECWARE D20 Surface Contact 1 x - Scantronic 9941 LCD Keypad Im looking to purchase the above items, I have cable. will all this work together also the tags on both keypads?

I have a twenty years old DA Systems Abacus 6P control panel. Each of the six zones is split with two PIR's on each zone. The existing PIR's are believed to be by Comet (but could be Stella or Apollo)and each has an integrated zone spliter so enabling three wire connection(12v+ 0v and tamper). Can you supply a replacement for the PIR's.

just wondering if you stock a piece of hardware which allows you to separately connect cameras and PIR sensors they don't really have to be connected together but would like remote notification of PIR sensing so cameras can be looked at

I'm looking at buying the dualcom complete with 1 year monitoring but I'm just wondering how that works who it's monitored with etc Do you guys do all the applications etc as I'm not a registered installer with them Or do they just liase with me direct? It's just to figure out who the customer would be. Me or the end user. Many thanks

The unit we received is a EE1215W Universal transmitter. We need to look at getting a receiver for it. The switch we have generates a wireless signal that has to go back to something to then make the actual switch. All we have is the transmitter. I would need to install a receiver into our product in order to make it switch on and off

we bought a galaxy 2-12 C012 some time ago and when we are trying to enter with the engineer code it is saying invalid code is there a way how to factory reset so the codes will be all reset please? it is a galaxy 2-12 honeywell intruder alarm panel

I have a 15 year old Eurosec system that I whish to refurbish/upgrade. A few questions: I have what looks like the CP8L remote pad - is there an better option to replace? Tag compatible? Would you advise replacing the main panel at 15yrs old? I wish to add another remote keypad (garage entrance) and a contact/PIR - best option (remote tag?) Can you recommend replacement PIRs? Is there such a thing as wireless door contact?

I want to place an order. We would like to change our G2-44+ for a GD 48. First i want to ask, can we move the settings from the G2-44 to GD 48 or do we need to set all settings when install? Can we buy a RS232-wiring and do it from a computer or do we need to purchase a sw to do it? Or is it free from honeywell? If not free, can we program all from the MK7?

we are searching for Flush mount type magnetic contact EN 50131-2-6 compliant, Grade 3 type do you have any?

I'm looking to spec up and purchase an alarm system for my house. I need a panel with 20 WIRED inputs, 2 keypads, and an extrenal sounder. I'm looking at the Honeywell galaxy flex system with the KO7 KP and ethernet interface, so we can use the Galaxy app to moniter. Please could you advise which products I will need for this package, and if you will despatch to my address in Greece. Thank in advance.

I need help to configure a hardwired alarm system. I'm interested in: 1 pcs Honeywell Galaxy Flex with GSM/GPRS 7 pcs Pet immune PIR detectors 2 pcs Microtech Galaxy MK8 Keyprox LCD Keypad 1 pcs Indoor siren 1 pcs outdoor siren I'm not sure which model of Honeywell galaxy flex I need (20 or 50?) 1. Can you please help an come up with a suggestion of which would be the right choice for me, with the above mentioned spec. 2. If I would like to add the possibility to also add wireless door sensors, what would I need to choose? 3. If I would like to add the possibility to access the alarm system with an app. What would I need to choose?

A number of years ago I purchased a Honeywell Galaxy 2-20 Wireless starter kit – Part # C020-01-C from you. • Software Version 1.44 • Hardware version 1.00 I’m considering purchasing the following products to give me access to the alarm on my local Ethernet network: • Honeywell Galaxy User Management Suite (Network enabled) - Model: R058-CD-DG • Honeywell Galaxy Ethernet Module - Model: E080-08 Can you confirm that the Ethernet Module and Software are compatible with the Galaxy 2-20 in its current Hardware and Software configuration? If a firmware upgrade is required please give details.

Do the Honeywell sensors, external siren and tag reader with built-in siren communicate over encrypted rolling code? Do these - FG8M, DFS8M, CO8M, IR8M, IRPI8M, DO8M, SEF8M and SPR-S8EZ, etc. I know the fobs and panic buttons do. These do - TCC800M, TCPA1B, etc. I am using the Honeywell Evohome Security at the moment, that uses the Le Sucre+ box. Is the Le Sucre+ box and the SPR-S8EZ grade 2 EN50131, if they are not grade 2 EN50131 is the dominion a better control panel to use instead? I know the sensors, external siren, fobs and panic buttons are grade 2 EN50131.

I am torn between the Pyronix 46 App, the HKC 1070 and the Texecom Premier systems. I want a hybrid system where I can have mostly wired sensors and outputs but with the potential for a bit of wireless. I'm comfortable with programming reasonably complex panels having done Texecom and Honeywell systems for my families houses. I've read a lot of great things about HKC on a Internet forum but I see you cannot connect the app to the panel without authorisation. Is this true? Can you provide this service?

hi im looking to buy the ADE Accenta Mini Gen4 Starter Kit with LED Keypad, 2x Quest PIRs and also the Klaxon 127Db 240v High Output Master Blaster Siren (12v Relay) and was just wondering if the klaxon will work of this alarm panel. thanks in advance.

can the master blaster siren be connected straight to230v supply via key switch without 12v relay supply,just need siren with 230v connection.

Hi i am after replacing an old alarm in my house, it currently has 5 pir's that are all wired, Door switches have been taken off when new doors fitted Think i need a hybrid system but would also like GSM control and internet if possible to access events it also needs to be able to connect to a Elmdene rapier 6000 sounder would like to add 4 wireless door contacts too preferably 2 way radio type. and 1 dual tec pir for the garage. seperate keypad with proximity fob or remote fob would be handy. last thing self fitting so nothing that is gonna take a degree to fit. what do you suggest and have you got it in stock.

I am replacing old ones of these. On the existing Optex EX-35R units is a sticker 869Mhz When I get these new ones, howh do I 'pair' it to the existing old Tunstall control unit, or how do I set the frequency to 869Mhz? Cheers in advance.

I need to buy one of the Texecom Premier Elite alarm panels (plastic case) and wanted to know if they have the latest Firmware v4.02 on them. My current Premier Elite 24 met with a slight accident after a mains power surge and it's destroyed it, so I want to replace it with an identical model. It will be much easier to replace and I have just wallpapered around two remote keypads. If I order Tuesday, is there any way of getting one before Saturday to a CH43 post code? I have dual sounders outside (front and back) and don't want to annoy the neighbours any more, so will have to replace it at the weekend. I'm also looking for something like a power surge adapter for th…

PowerMaster 30 0r 33 + 2-way communication I have a phone line and modem next to box House and garage 1 PM 30 or 33 (IP) 3 PIR (Camera) 1 Dummy + Flash 5 x PIR (2 x Garage, Kitchen, Dining room, Landing) 1 X Key pad 1 x Siren with flash unit (main building)

Hi, I’m thinking of installing a Pyronix wireless security system with live alarm boxes at the front and rear, including 4 pet friendly PIRs and 3 door contacts. I would like to operate the alarm from my phone. What price would the system be and could I come in to you office to discuss. Please advise.

I would need to know which wireless receiver ( output relay ) you have that is compatible with door contacts from Inovonics - model EE1210W?

I'm looking for a recessed sensor for an alarm, needs to be unobtrusive as possible,