Intruder Alarms

which pir is suitable for scantronic 9449 burglaralarm

Hello, I'm french and my english is very poor... I'm a retired man living in a house and so I'm not a company. My house has 15 contacts of relays (one on each door and on each window), they had been placed during the construction of the house. The wires are in the wall and completely hidden. I'm looking for wired alarm with an ability of extension ( number of wired captors or also wireless captors). The centrale must be quite (no siren) to be dissimulated from the burglars. In my bedroom I want and keypad with a LCD that can indicate to me where the intrusion occurs. My job was in informatic system, so I will be happy to configure my alarm wit…

Risco beams 72 series (7225,7250 and 7275). The data sheet tells me what the tamper output is but not the alarm output ie if it a changeover relay, contact closure in alarm condition etc.

Hi, From forums and even neighbors I hear that The Securitywarehouse is in fact the only place to get an alarm system at a reasonable price. Only the quantity of the products creates some confusion with me, therefore I would like some advice. I am looking for an alarm system to install in my house next to my home automation system. As I see on your website I have the choice over various systems. My concern however is that all components are compatible with each other. I am looking for the following: A hybrid central unit (wired and wireless) with battery. 3 wired keypads 5 PIR detectors (both infrared and microwave) with pet immunity. (wired…

Hi I am interested in purchasing the Scantronic Homelink 55 system for use at my private residence - this will allow me to upgrade my existing system and utilise the alarm cabling with the added ability to install future wireless devices without the need to install any further cables. My query is this - when installing the alarm can all of the programming functionality be achieved by the use of the keypad included in the pack - or does any specialist device or software need to be purchased? Many thanks John

I would like to buy a menvier SD3. Is there a difference between the UK version and others. If I install the SD3 box in Belgium, will it work

Hi, Can I use the Optex PIRs with the GJD Digizone lighting controller? I want to use Outdoor PIRs that are not triggered by small animals. Thanks, Martin

I also need a manual on how to program GJD wireless PIR's to the reciever. I bought them from you a while ago but the receiver has lost it programming.

I have a customer who is after adding a wireless keypad onto a Texacom Premier 24 (wired) system. I was under the impression that this was not possible without replacing the panel and all accessories (PIRs, Contacts etc) completely. Could you please advise me if there is a product whereby I can add a wireless keypad to this system

Hi, I have a Honeywell Flex 20 C005-E2-K04I with Mk8 Keyprox Keypad and Ethernet and I am looking for IR detectors. what do you recommend? I am not interested in wireless detectors, could you please also advise which smoke detector, door magnet and RF portal card is required? Doesn't have to be Honeywell.

Description states "Many metal control panels connect 0Volt of the 12VDC supply to the case of the box." Do you know if this is true for the Honeywell Galaxy G2 panels?

Hi, how to wire the kx15dtam sensor to the Optima alarm panel.I simply want to replace the now obsolete Equinox E sensor. Thanks

We have recently moved in to a house fitted with a Scantronic 9448 alarm system. We believe we need to replace the PIR detectors to pet tolerant ones (as we have two house cats) and I wanted to check before I go ahead and purchase them that the 430 PIR will be compatible with the existing system?

I have recently changed a Optima compact Gen 4 panel as a favour for someone. The first panel that was bought through Amazon had a fault on it. A second unit has since been fitted and all is working except the new Siren which is a Reson 8. The unit comes with pre-fitted links across TA TAMP and PA. The manual states that these should be in place when powering the unit up. This contradicts some advice on online instruction that says to remove the link to T A when wiring the siren. The external siren does not sound or flash when an alarm is activated, internal sounder in board works OK and all zones work fine on a walk test. No LED,s in the siren are vi…

Hi looking to fit logic 6 to my house and i need 5 pir i was looking at the bosch ones one of those is for my garage and 1 door contact. will this all work together or would recomend a diffrent control unit? hope to hear from you soon i would like to order today thaks Dan

Please can you confirm wiring details for this system: the control is the Honeywell Galaxy Flex 20 and Honeywell IS215T PIR's are these compatible, how do i connect these as i have only wired alarms that have a separate tamper circuit connections do you have any wiring diagrams showing these PIR's wired singly to each zone ( 1 PIR per Zone)

Hi Can you please advise the best IR Beam for my outside gates, needs to have 10 meter distance ?

Hi. I need to replace my Pyronix Enforcer wireless system outdoor Siren (leds have failed) and wanted to make sure that the newer Databell WE module with the new Varta battery’s is comparable with my set-up before I order. Running software v10.

Hi I have bought a new remote fob for my Scantronic 500r+ alarm system. I have managed to get the system to "learn" the new remote but the new remote will not set my alarm. Can anyone help?

I have installed the gen4 alarm and then have just bought a extra keypad to add on to the system. I had a led keypad which I have know used up stairs,and the new keypad is a LCD which is down stairs. do you have to stick to just led keypads or can you mix led with LCD. when I wired it in it blew the fuse on the board and the battery fuse blew,I replaced the fusees and the transformer got rely warm,also came up with tamper fault lockout on keypad.I then disconnected the led keypad,and left the new LCD keypad connected to the system.the system now has no power to it,but still works on the battery power.have checked the wiring several times through the process but cant ex…

can you let me know if the Honeywell activguard AG6 works with the Visonic powemax system that you sell.

I have been recalculating and it seems that the Galaxy G2 wireless starter is is a very good deal. The kit is about the price of the sensors and the keyprox. which means I would get the panel + RF portal for free. Am I missing something here? If I want a Dimension 48 wireles started kit it seems I would better buy the wireless G2 kit + a separate GD 48 panel. Also if you cam me me a better deal for a GD 48 + MK7keyprox + 3wireless PIR + 6 wireless door contacts + 4 prox's + 2way switch I would like to hear that too. PS. Can I dial/log in remotely (PSTN/Ethernet) with the dimension?

My company has a Scantronic 9752 Product 152/196 alarm system and we need to get some additional alarm fobs. Are the Cooper Prox tags (Product 11/113) the correct ones?

please confirm that the DBA-0001 Texecom Premier LCD Keypad is compatible with the Texecom Premier 168 Control Panel. Thanks.

The requirement to use this sensor is for a sports hall in a school. Can it be installed inside a cage and do you supply a cage for it? Thanks