Intruder Alarms

I have a optima G3 panel which is faulty and am looking to replace. In order to simplify replacement would the circuit board from the G4 fit in place of the existing board? (fixings in both panels look to be the same)

Scantronic EXCELR 12m Wireless PIR will this work with my scantronic +500r panal please advise the frequency your help would be appreciated

Just instaled the panel, remote key pad and sounder and pirs. Firstly the instructions didn't match the sounder terminals with the panel but I think I may have sorted it know but the proble I have is as soon as I connect the sounder battery jumper the sounder goes off this happens with the panel wired and powered on fully disconnected from the panel. I have the system up and running if I put itI into alarm I get nothing from the main sounder sound or strobe but the sounder in the remote key pad sounds Please can you help?

I'm interested in the texecom elite 24 alarm, can this alarm be set via a mobile phone or land line.

I have an accenta 6 control unit. Do you sell a suitable telephone dialer other then the Scantronic Unit?

could you help me identify location of the "auxiliary power fuse"in control panel. I want to remove it while I replace PIRs.

Hi Can you please advise the best IR Beam for my outside gates, needs to have 10 meter distance ?

The system was installed and commissioned as part of a new build. When we moved into the building End of January 2011 we started to set the alarm. On two occasions the alarm has gone off in the middle of the night. on both occasions the keypad has been totally blank but still powered because you can see the back light. on both occasions the only way to stop the alarm has been to open the control panel and disconnect the battery. The electrician (that always fits rafiki alarms) on powering the system back up found that the system thought the keypad had been tampered with. The first time we thought it was the tamper sensor and adjusted it. The second time with the same faul…

I recently bought 1 x scantronic 768r receiver and 8 x 701reur-50 transmitters which work great with the exception of range failure at a couple of extreme locations on site. will the 794rEUR-00 antenna improve the range or do I need another piece of kit. please advise so I can order the correct parts. many thanks,

I'm looking for the ProMax / Visonic Complete system, preferably in a kit, but I can't seem to find it at your site. Is this system something you are selling or do I need to look somewhere else? If you do, can you please point me where to find prices and so on. I'm also wondering about the price on the Visonic PowerMax Pro system. You seem to have very competative pricing on the other stuff your selling, so that's why I'm interested.

Hello, I would like to buy an eaton i-wifi01 with a 12v bare wire power supply, do you supply the power supply as well?

I'm interested to buy from you a complete set of alarm system for my house. i want it to consist from a good expendable control panel so i chose the scantronics ion40. I'm building a new house so i did all the provisions needed for wired installation. my system will consists of: 10 magnetic contacts for doors/windows 5 passive infrared detectors 2 smoke detectors 3 keypads 1 internal and 1 external siren The thing is that i'll try to install it myself so i'll need help as much as possible. -when i buy the ion40 system it comes with 1 keypad already and i'll have to buy 2 more or is something different so i must buy 3? -i read the specs of ion40 and is only sup…

Hi, thinking of using the Texecom Speech and Text dialler with an Aico Ei428 relay on a smoke alarm system, the not received relay yet, but sales literature of relay says it has Volt free relay contacts, can be configured to switch up to 230V, would this dialler work with it? Any assistance would be greatly appreciated. thanks

My company has a Scantronic 9752 Product 152/196 alarm system and we need to get some additional alarm fobs. Are the Cooper Prox tags (Product 11/113) the correct ones?

HI there, I just need to have a chat about order a, x1, Honeywell Panel with key pad, 8EP396A x4, PIRs, pet friendly x1, door sensor x1, Informer Speech dialer 8EP276 x2, Mains smoke alarm linked, prefare AICO x1, Mains heat alarm linked, prefare AICO x1, 100M alarm cable. Is there a kit that can cover the above?

Please advise if you can supply a replacement PowerMax Plus panel (433 MhZ) to Cyprus?

Hi, I wonder if you can help. I have an alarm system Networker ((Menvier) TS690R and need some additional wireless pir sensors. From what I can see they don't make the alarm system any more, but looking at your site it appears the Scantronic pir's maybe compatible?

hi have euro mini castle caretec is there any pirs that can go in a bathroom?

I purchased from you last year a optima 4 replacement panel as my existing panel stopped working. Now my external sounder is so quiet you can hardley hear it, Please can you advise if this could be a fault within the panel or is it the sounder itself. I have checked all connections and they are ok

Hi there, I'm looking to install a house alarm for my property and I require a little bit of assistance finding the right piece of kit for me. Ideally I want the system to be wireless. I want one of those Klaxxons which will alert the area if there was a break in. I would need 12 Pirs. 7 Door Sensors. 7 window sensors. I also want the main box ideally to be hidden away, and use a wireless keypads by the doors. (2). Also I'm not so fussed if the alarm bell has to wired up. If there is Wifi and connectivity then that would be a bonus. Please let me know if you need to know more information. Kind regards Hiren

I would like to upgrade our Galaxy 512 with Ethernet module in order to control the system remotely and to when need be, handle programming and updates through Internet interface, rather than using one of the MAP's in the system. My understanding is that this could be done by complementing our existing system with an additional Honeywell Galaxy Ethernet Module (Model: E080-2) from you, and also I guess, I need to upgrade the SW that currently running as that is an old version, - Ver. 1.27. Our Galaxy 512 motherboard is Rev1.6. Pls. let me know if my thoughts are right, and if so provide me with the pricing for the ROM/EPROM for the SW upgrade, and if needed any ad…

I recently purchased 1811lr 40m range twin sensor from you, this came without a control unit. Can you please advise what other equipment I require for this to work with my existing light

i have the optex ax 130t beam system, but unfortunetely the plastic cover is damaged on one of the units. Can I buy a plastic cover only for this unit from you guys??

I bought a powermaster 10 kit and i have a auto test alarm thats sends to my phone on strange dates (23-10-12, 07-01-13, 03-04-13). I have looked everywhere in the menys but can´t find any autotest meny with that kind of options of dates?? Also my powermaster hums alot from the Power unit, is that normal?

I would greatly appreciate if you let me know if the above mentioned receiver can convert my existing hardwired Cisco 601 allarm panel sytem. If so, do I need additional devices to make it fully controllable by mobile.