Intruder Alarms

I currently have a Visonic MCR-304 receiver used with a MCT-320 Magnetic Contact Transmitter on a door. The MCR-304 has developed a fault and I believe this item is no longer available. I was looking at the Pyronix UR2-WE as a possible replacement. I appreciate I will need to replace the magnetic contact transmitter; is there a compatible device and will the Pyronix UR2-WE be suitable. The MCR-304 is connected to a Texecom Premier Elite 24 and uses the 12 volt from the alarm. Many thanks

Can a DIYER change a wired room sensor (blue sensor light constantly going on with no motion detected ) it a Castle Euro mini . If so can you please give relevant information as cannot find it in the user manual RIN S 1209-5 or programming RINS1210-6 to get rid of sensor removal tamper alarm

Hi, I was looking to purchase 8x Menvier SD3 Speech Dialler. I can see this is now obsolete and the replacement is Eaton Universal 4G speech dialler. Our design is based around a PSTN version and we utilise our own PABX system so the BT PSTN switchoff will not be a problem for us. Do you have an alternative that supports a telephone line connection? Regards, Rubel

Hi. Do you have wireless window vibration sensors in brown that work with Galaxy wireless alarm system?

Will the SECWARE D20 Surface Contact work with an old Accenta Intruder Alarm?

I have a 9600 alarm installed and need to relocate the keypad, problem being the keypad is on a under stairs wall and the internal bell box is directly behind the keypad on the inside of the wall, the wire between the 2 is about 3” long, can I disconnect the bell? Move the keypad and reconnect the bell, I know the tamper will go off but will it be ok to just put the code in when it does go off ? thanks Tony

Hi. I need to replace my Pyronix Enforcer wireless system outdoor Siren (leds have failed) and wanted to make sure that the newer Databell WE module with the new Varta battery’s is comparable with my set-up before I order. Running software v10.

Could someone help with connection for new box please,ive cut the cables on the old lexecom box but not sure on connection for new box,I am a spark just never worked with alarms Thanks Tony

Need a replacement wired room sensor please. Old system runs from Scantronic 9600 keypad. Not sure what would be a sensor match for either of those in attached images. Image 5186 is of original that came with system and image 5187 is a Rokonet fitted later. Thanks.

Hi, I want to make a quick enquiry with wifi jamming becoming more common would this affect visionic powermax pro kit

What USB to 232 cables are people using for G2 compatibility? It seems that my dimension USB cable will not play ball with the G2 panel. Works fine for dimension panels and associated 232 cable, just not the G2 panel and cable., Thanks John

Looking for a PIR sensor that is normally open or both.

Looking for a shock sensor. I have an isolated gantry with access stairway. Trying to identify if there is a shock sensor / virbration sensor that can be placed on the metal structure that will send alarm when detection noted. Do you have a device that will perform in this manner

Texicom Premier Elite 24 panel, siren and medusa PIRs, Order Number: ***** 31st March and recently completed the installation hard wiring 5 PIR’s into each of 5 of the 8 zones available within the panel. I have set all 5 zones ‘double pole / EOL’ but the panel is showing tamper fault error message. Following further investigations it appears the medusa PIR require 2 resistors to be installed across the tamper 2k2 ohm and zone 4k7 ohm. My first question is – is this correct and secondly do you stock these items.

good day would like to know how many door contacts can i wire together each zone of the euro 46s panel.

Can you tell me if the Honeywell AC030 alarm button can be wired with just two wires? My current one which I need to replace only has two wires connected to it and the tamper function when removing the cover still works.

I’m after 2 No. keypads compatible with the 4 wire Gardtec 600 or can you recommend a compatible alternative.

Would like to know if the Visonic 33 kit is easy to install?

I need 2no wired zones aswell as the wireless ones. will the expander for the Powermaster 30 work or do i need the 8 zone expander?

I have an old ADE Karizma iD system I would like to replace. Do you have iD systems in stock...?

Galaxy RSS software and Management Suite. Wants to know the difference.

I am looking for a Texecom panel to use biscuits, with 2 KP and also want some smoke detectors. Could you recommend which products are best please?

I am looking for a replacement for RISCO B-673-0008, to work with Gardtec 595 & I understand the iWISE DT PET is now no longer available. Thanks Fred.

I am looking for a replacement for RISCO B-673-0008, to work with Gardtec 595 & I understand the iWISE DT PET is now no longer available. Thanks Fred.

I have an Infinite Prime Alarm System installed. The alarm system has a PSTN module which I want to setup.I intend to run a two wires (blue/white and white/blue) from the master socket to the micro filter marked ‘from VDSL Line’.The two ‘OUT’ wires marked ‘To Modem’ would go to the two terminals on the PSTN module. Is this correct?Is the PSTN module performing like a modem? I do apologise for my lack of ignorance regarding the function of a PSTN module.Thanks