Rob Posted July 22, 2010 Share Posted July 22, 2010 Hi I want to add a magnetic lock that released when the panel is unset. I see there are 2 outputs on the Premier 48 both that can take 1A but this seems alot. is it really ok to wire directly on to the pannel without needing a relay. Im thinking of running the SSP Mini Magnetic Lock unmonitored on the door conserned. if I do need a relay do you have a prepackaged one with power supply etc? Any help apprecated. Rob Quote Link to comment Share on other sites More sharing options...
Specialist1 Posted July 23, 2010 Share Posted July 23, 2010 Hi: Just had a quick look at my Installer Manual for the Premier 48 & it shows that outputs 1 & 2 can be used to drive loads of up to 500ma each output not 1A, so your best bet would be to use a relay unit. Hope that helps: Andy @ Amman Security. Quote Link to comment Share on other sites More sharing options...
Secware_Tech6 Posted July 29, 2010 Share Posted July 29, 2010 Id agree, i wouldnt connect the mag direct to these outputs. Plus you may need an additional psu to run the lock. A relay would be the best way. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.