Tony Posted July 10 Share Posted July 10 I have a 9600 alarm installed and need to relocate the keypad, problem being the keypad is on a under stairs wall and the internal bell box is directly behind the keypad on the inside of the wall, the wire between the 2 is about 3” long, can I disconnect the bell? Move the keypad and reconnect the bell, I know the tamper will go off but will it be ok to just put the code in when it does go off ? thanks Tony Quote Link to comment Share on other sites More sharing options...
Secware_Tech6 Posted July 11 Share Posted July 11 Yes Its normal to power it down as if you cross a wire you can blow the board or a fuse. Bear in mind to the 9600 is gonna be around 30 yr old now Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.