IanR Posted September 27, 2016 Share Posted September 27, 2016 Hi, I have a Eurosec CPX alarm system. I also have the engineer and user codes. I need to change the battery as it's probably eight years old. Please could someone give me a step by step guide as to how I disable the system so I can open the control unit without setting off the alarm. I am happy with the physical change of the battery. I have the 'User Instructions' but it does not cover battery replacement. I guess I would need a maintenance manual. I have also noticed that when I have a power cut the alarm goes off. Is this correct and if so how do I disable that function. It happened a couple of weeks ago when I was abroad on holiday, much to the inconvenience of my neighbours ! Thanks in advance. Ian Quote Link to comment Share on other sites More sharing options...
Secware_Tech6 Posted September 27, 2016 Share Posted September 27, 2016 You don't want to disable that side Just put ur panel in engineers and you can open it without alarm Quote Link to comment Share on other sites More sharing options...
Secware_Tech6 Posted June 13, 2017 Share Posted June 13, 2017 I don't understand your question? Quote Link to comment Share on other sites More sharing options...
Bb8 Posted November 8, 2020 Share Posted November 8, 2020 Hello, how do I put the panel in engineer mode? Thank you Quote Link to comment Share on other sites More sharing options...
Secware_Tech6 Posted November 10, 2020 Share Posted November 10, 2020 Hi, are you trying to this yourself or are you the maintainer Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.