budda Posted February 21, 2016 Share Posted February 21, 2016 My alarm installer went missing last year and has left me with an alarm system that doesn't seem to be operating smoothly. He left me an engineers installation manual but the grandmaster code he wrote down doesn't work. So I took the panel off the wall and carried out the steps detailed in the Agility 3 manual page 17. When reconnecting power it makes the panel announce a tamper error and refuses to do anything on the keypad. Putting DIP switch 3 back in to the on position stops the errors but wont let me change PIN codes in the grandmaster menu. So i'm stuck at the moment.... what's the missing steps to complete a reset and change of the engineer and grandmaster codes ? Quote Link to comment Share on other sites More sharing options...
Secware_Tech6 Posted February 21, 2016 Share Posted February 21, 2016 It may have a locked code. If so will need a new board. Id contact another local installer but go for an approved firm that have been about a while Quote Link to comment Share on other sites More sharing options...
budda Posted February 21, 2016 Author Share Posted February 21, 2016 All sorted - it was due to DIP switch 2 also being set to on earlier - which allowed me to wire up an external input to my Sonos system for the voice messages. So now i'm wondering what i'm doing wrong (that isn't mentioned in the manual) regarding setting up the external audio. Hmm.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.