Hi,

 

I installed the LCD panel yesterday. and the screen just froze a few hours after I set the alarm. The keypad was unresponsive and showing time and date on the screen. I powered the alarm off and when I reconnected it, the LCD panel was still unresponsive but the screen was showing

 

Accenta G4 RKP

F131-01-111

 

The keys are NOT responding.

 

Any help?

Thanks in advance.

Sounds like it isn't communicating with the panel. Check the connections. Is there only 1 keypad on it? Also what's the day mode current?

I've got the same issue...

Alarm fitted and working fine for several months.

Started getting a fault on set from a single PIR.

Changed the PIR and had no problem for a few weeks, last night I get the fault again.

Decided to disconnect the PIR, now the panel is stuck showing the above code.

Doing a factory reset doesn't ckear it...

Anyone got any ideas??

 

id start be disconnecting all and running the keypad on a short length of cable to prove that first of all

The keypad is on the wall behind the box, so the cables only about a foot long anyway.

I rang Honeywell, told me that the fault code is a comms issue in the keypad and it's beyond help...

Id still disconnect and take the keypad to the panel or certainly test every core etc. If moving on a temp cable with all disconnected it will prove if something has failed