Afternoon,

 

I have recently installed an optima compact gen3 system in my house and added a remote keypad.  The system is working fine and walk tests etc with no problems but whilst it is day made the remote keypad and main control box emit a double beep approx every five minutes (very annoying).  I've gone through the operating manual and the engineers manual I have and it seems this would be the system telling me of a line fault for the communications system.  However, as you as probably aware, there is no comms system on the compact panel.  any idea how I can stop it beeping at me please......?

 

Thanks,

 

Neil Annals.

without knowing hw its programmed i would suggest you have turned on chime on a circuit.

 

best way is to check that, if its not that, then id suggest removing all cabling and linking everything out, to see if the beep still occurs.

how do i check that? :-\

HAve a look in the user manual about chime, and enableing disabling etc

 

starts at page 8

No, that didn't work either.......

 

Any other ideas?

Hold the phone!

 

Sorted it, i found the line fail active high was flagged in "flag b" options menu.

 

Thanks for the help anyway....

well found.

 

Gald your sorted.

 

Support