Secware Posted May 17, 2011 Posted May 17, 2011 I have a problem with the GSM-module...when I installed it I made the system powerless as it said in the manual, installed the sim-card and put the module in place. I connected the power both the battery and the AC. When I later should install the GSM in the "menu# 6" (where I put in the numbers the alarm shall sms to) it Quote
Secware Posted June 3, 2011 Author Posted June 3, 2011 in the COMS Menu you need to enable dialling -SMS only. Add telephone numbers into SMS menu (Not dialling Menu) Central Station report (Option 2) turn of PSTN line failure. Quote
Secware Posted June 3, 2011 Author Posted June 3, 2011 This menu you are writing about, shall show up as soon as you install the GSM-module, the alarm itself senses if a module is present. If you Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.