SJ200 Posted March 10, 2009 Share Posted March 10, 2009 I have replaced an old Optima XM6 panel with a new Optima Compact panel The system works fine with program 1 My problem is I cannot get it to part set using program 2 I enter my code, the exit beep starts, but when I press the PROG key, the exit tone, that should stop, keeps going, so I can't get to select program 2 Tried reset to factory defaults but it did not help Thanks Quote Link to comment Share on other sites More sharing options...
Secware_Tech6 Posted March 11, 2009 Share Posted March 11, 2009 you need to enable the other part sets. Have a look in the manual and there are setting types for each part set. You will notice part set 2 is defaulted to 'none' ie disabled. Support Quote Link to comment Share on other sites More sharing options...
SJ200 Posted March 12, 2009 Author Share Posted March 12, 2009 That fixed it. Thank you very much for your help. Quote Link to comment Share on other sites More sharing options...
Secware_Tech6 Posted March 13, 2009 Share Posted March 13, 2009 glad your sorted Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.