DG Posted September 14, 2010 Share Posted September 14, 2010 Hi! Can anyone give me a reason to why my PowerMax+ have started to set off "Trouble alarms". Almost the same alarms every time. I need guidance in what to look for. When I check the log, it shows: * System jammed * Line Failure * AC failure (only the first time and the power were on all the time) and then * RF Restore So far it has happened twice in a month. Both times when the alarm is off (the first time the alarm were set off half a minute after disarming the alarm from HOME setting, the second time about 30 min after disarming AWAY. First time, the alarm were reset while I was checking the log (less than 2 min after the alarm set off), the second time it restored itself after 30 min (which happened almost simultaneous with me pushing a button on the wireless keypad hearing the alarm telling me "Disarmed, NOT ready to arm"). The system are less than 5 months old and no problem besides this. I have no reason to believe that the system are deliberately jammed or that the line is affected in some faulty way. Quote Link to comment Share on other sites More sharing options...
Secware_Tech6 Posted September 23, 2010 Share Posted September 23, 2010 a jamming signal may be a deliberate jam attempt but is more likly to be interference etc. it can be disabled but i would try and find the source of it. Look for any nearby wireless devices that may be affecting it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.