Intruder Alarms

What is the difference between Texecom Premier TD-W and GJD D-Tect X wireless? Are they both intended to perform the same job? Is there any drawback for Texecom product compared to the GJD one? How can i choose between these two?

Good morning, Thank you for your email regarding the cover for my Flash Guard sounder. I am quite happy to purchase a new unit but would like to know if the six core cable that controlled the old unit will be ok for a new one. I have included a photo of the old unit and to which colour went to which connection on the vertical block located on the left of the photo. 1- Yellow (Tamp out) 2- White (Tamp in) 3- 4- Blue (Supply minus) 5- 6- Green (Trigger) 7- Red (Strobe plus) 8- Black (Trobe minus) There was then a Red coming from a battery going to the plus connection on the small terminal block. I hope this will help in recommending the right sounder for my application.

I recently purchased a Honeywell galaxy G2K3WR-01-C and ADE Honeywell 8IR103 PIR. I require some technical support for wiring the Activ8 detector (ADE Honeywell 8IR103 PIR). I have the usual manual which comes with the panel and the detector but it is not that clear. I am simply putting one detector per zone and resistors at the detector end. I which to know where the resistors are actually connected to and where cables are connected to. Would you be able to assist please? Also, can you advise what speech dialler would I need for this system please ?

Hello I have a Honeywell Galaxy Dimension Alarm system, with the plastic housing RF module and a mk7 keypad fitted. I am looking to upgrade to Galaxy Flex to make use of the App, and also the mk8 keypad. My current system has several faults I cannot clear, and unfortunately my Alarm installer has gone AWOL and he has changed the default engineer codes. Can you let me know if this would be the right kit to replace my current panel: Model: C005-S1-E1+CP051-01+A083-00-02 - £208.65 Ex VAT And do you sell the backup battery to suit this new panel

Hi Can you please advise the best IR Beam for my outside gates, needs to have 10 meter distance ?

Hi, I have a Honeywell Flex 20 C005-E2-K04I with Mk8 Keyprox Keypad and Ethernet and I am looking for IR detectors. what do you recommend? I am not interested in wireless detectors, could you please also advise which smoke detector, door magnet and RF portal card is required? Doesn't have to be Honeywell.

Hi, Im looking for additional replacement wireless sensors (contact and vibration) for a Risco WIsdom system, RWT62 (contact) and RWT6S (shock), you dont seem to have these in stock. Are there compatible replacements? I think they also be available under the Gardtec brand.

Hi, we are looking for a ?security chain? to attach to an out-board boat engine. Should the chain be tampered with we would like an alarm to sound in the house, not at the boat, maybe 30 metres away. Do you have anything suitable? Thanks

Hello I am having trouble finding a suitable hybrid wired/wireless alarm system. I have owned an alarm system in Australia, but I am having trouble finding a solution which re-creates the features that alarm had. The panel is for domestic purposes, and I would like it to have: * A wired door entry pin code pad * Be able to use a mixture of wired and wireless PIR/Glass break detectors/and shock detectors (Last one where possible) * The door contacts must be wireless, and as discrete as possible * Wired external bell box/strobe * The panel must be able to do part sets : eg, night mode > full perimeter armed,internal PIRs off, no delay on front door Home mode > Selecta…

Hi, with the Visonic Powermaster 33 if I fit the GSM module what functionality do you have through the app, or do you need to subscribe to the monitoring program to gain the app functionality. Also what type of sim is required, will it work with a G4 network or does it as with other alarms only work with the older G2 networks? Thanks

Good afternoon, I consider buying a Visonic Powermaster33 system. My premises are in Germany, and operating a UK system in Germany may cause some headache (or not). Is it possible to connect said system to non-UK alarm response services? I have been told that UK systems are locked to UK response services which would render the whole system useless for people in other countries. I already know that there are some restrictions concerning the interoperability of devices. Please shade light on the topic. Thanks in advance!

I'm looking to buy the GSM module for the Visonic PowerMax Complete alarm panel. Can you tell me that i do not need a central service station for this to work? If i need a Central Service Station, is this something i can setup?

There is no telephone socket near by so want to link to WiFi network and get notifications via mobile app. What system is there available.

would the Siemens IMKW6-10 wireless contact work on a Europlex signet 200 alarm panel.?

Hello, I would like to buy an eaton i-wifi01 with a 12v bare wire power supply, do you supply the power supply as well?

I recently purchased 1811lr 40m range twin sensor from you, this came without a control unit. Can you please advise what other equipment I require for this to work with my existing light

Brown recessed 24V door contact to switch a contactor for an oven off in the event of door closure

Purchased a 760ES and has the following problems; "The Siren is proper teached to the Control Unit with a high signal level. The Control Unit respont correctly to the two tamper switches wehnever they will be activated. The Siren dosen`t sound and flashes. It also dosen`t sounds when the Batterie will plug in. (referring to Info on Page 3 Installation Guide) It doesen`t sounds and flashes when the tamper switches will be activated." Can you confirm if the Siren would be faulty?

i've purchased a Honewell 8EP416-EU to replace the RCP on my C&K Securit 800L. Please would you confirm which connections (COMMS and SOUND) correspond to C and D on the old Securit RCP? Thank you.

I have an existing Accenta Gen4 Alarm Panel - 8SP411A with 8 wired sensors. I want to replace the control box with one that has a LAN or WiFi interface for connection to my local LAN and is capable of sending alerts via email and has a web interface contactable on the WWW. I want to retain my wired sensors but also have the option of adding additional wireless sensors. Can you recommend a suitable control box?

Could you please tell me how I can pick the updates for the newer panel with the new display panel coming up to date

Well, the Honeywell ADE Informa speech dialler I bought is to replace the current AD2000 speech dialler that is not working any longer. The speech dialler is to be connected to an Ademco 4204 relais module (with 4 relais) which in turn is getting its pulses from a Honeywell Vista 50P alarm system. So, basically, when there is an alarm in one of the 3 partitions I have in the alarm system (the Vista 50P), this triggers one of the relais in the Ademco 4204 which in turn triggers the speech dialler which then calls the phone of the home owner. The problem is that the current AD2000 speech dialler is connected to the Ademco 4204 relais with two wires each while the Hone…

Can you please advice me on what system i shall use? I'm out after an alarm system that has at least 3 zones (1 for intrusion, 1 for fire, 1 for water leakage) for a 2 story house, preferably which own output channels and which is possible to connect to the internet. Maybe for intrusion i should have 3 zones, like inside, perimeter and outside? Sensors i will need are: Burglary (movement - with windows breakage?), fire sensors and water leakage sensors to put in sensitive areas. I have been looking at the honeywell which seems good, but can you please give me some suggestions on good systems?

Hello I’m looking to purchase an alarm system with the following requirements: GSM Wireless Control box Capable of having two real external siren boxes Three wireless smoke alarms Three wireless PIR’s Two wireless door switches And also the capability of connecting at least two hard wired PIR devices Do you have any brands that would fulfill this requirement?

I wonder if you could help. I have a number of Aritech GS610 window sensors fitted in my home but they are not connected to the alarm box. could you tell me please which of thr 4 wires are power supply and which are sensors?