stephanie.drew@btinternet Posted January 31, 2010 Share Posted January 31, 2010 We have a Verista 8 system installed in our house. The previous owners didn't leave the manual and now the tamper light is on and alarm does not sound. Can anyone help? Quote Link to comment Share on other sites More sharing options...
FastCar Posted January 31, 2010 Share Posted January 31, 2010 If you have a tamper fault , then this must be cleared before the system will work.If you go to the Texecom website , you will be able to download a user manual there.(note there are 2 variants , pre and post 1999).The tamper circuits go to the bell , around all the detectors , and the lid of the panel , so think if you have any workmen in who could have damaged any cable/detectors, done any decorating. Quote Link to comment Share on other sites More sharing options...
as118150 Posted February 1, 2010 Share Posted February 1, 2010 I think you can try to short the tamper connectors in your detectors one at a time to see if it goes away. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.