as118150

many thanks for this. I will place the order shortly but could you kindly tell me which 2.1 battery will fit this unit so that I can order it. thanks

Elaine, I still haven't received it, could you please kindly speak to Risco or whoever send it and find out where it has gone assuming it was send recorded. thanks

Ok thanks. can you guys do price match for this system( with tritonfiresystems.co.uk) - thanks

support/Elaine, is the 2.1Ah rechargeable battery included with 9448EUR-95 STYLE? thanks

I think you can try to short the tamper connectors in your detectors one at a time to see if it goes away.

no matter which one you select you will get all the help you need from the support staff at security warehouse which will make it easy for you to install and configure it. I have installed risco cpx and I think it is great.

Elaine, As always many thanks for your help, hopefully this time I will get it and for some reason if I don't then at least it can be tracked. I will submit a post as soon as I get it. cheers

Elaine, I still haven't received it, is there any way you can send it recorded please so it can be traced. thanks

I will wait until friday before bothering you again just in case royalmail are still clearing christmas backlog thanks for your help as always

I will wait for your answer. thanks

Elaine, I still haven't received them, can you please check to see if this went to the correct address (as in my order) thanks

many thanks as always for your quick reply. cheers

Elaine, can you please let me know when you will be able to post the resistors? thanks

Elaine, my order number is 17127 if you could send whatever is suppose to have come with the panel please. I actually meant 4.7k and not 47k but I guess whatever you are sending should be the right one for cpx anyway. thanks a lot for quick responce as always.

out of 6 PIR, 5 are with resistors but the 6th one is without so I need 47k and 68k for this pir and I also need some 47k to link the unused zones. The document which has come with cpx show color code for resistors, does that mean I just buy them from anywhere or they are suppose to come with the control panel?I did not get any resistors with the panel, do you sell them seperately? thanks

but if I use zone pairing (eol with normal guardtec wiring without fault/mask) then I would loose half the zones, isnt't it? do I have to turn on zone pairing when I am using the eol with normal wiring option?

yes I have - thanks. i have gone through it but there are few questions which I have asked which are not clear in the manual if one of you experts can answer it would be great. thanks

I am currently using standard 2 wire (common tamper) and have linked the unused zones which seems to be working but the engineer manaul says 9(eol) wiring is more secure, I am thinking of changing it to use eol wiring(I am using eurosec PIR without fault or mask terminal), if I do this then it would leave me 2 unused zones plus unused tamper(which becomes 9th zone), do I need to link them as before or do I need to link them using some 4k7 resistors as the other zones? also in the engineer manual it says you should select 9(eol) in the wiring option(page 23 of manual) and then normal (standard gardtec wiring configuration without mask or fault detection) but then it says it should only be used with zone pairing but then I would loose half the zones. my questions are 1) what to do with 2 unused zones and 1 tamper zone 2)do I have to use zone pairing with 9(eol) and normal mode. 3) how would I wire a SECWARE SC517/WH to 9(eol) wiring 4) how do I connect a internal sounder to cpx(SECWARE 2 way 'Sound Bomb' Internal Sounder) many thanks

many thanks.

can you please give me the dimensions of this speaker? thanks

I am currently using standard 2 wire (common tamper) and have linked the unused zones which seems to be working but the engineer manaul says 9(eol) wiring is more secure, I am thinking of changing it to use eol wiring(I am using eurosec PIR without fault or mask terminal), if I do this then it would leave me 2 unused zones plus unused tamper(which becomes 9th zone), do I need to link them as before or do I need to link them using some 4k7 resistors as the other zones? also in the engineer manual it says you should select 9(eol) in the wiring option(page 23 of manual) and then normal (standard gardtec wiring configuration without mask or fault detection) but then it says it should only be used with zone pairing but then I would loose half the zones. my questions are 1) what to do with 2 unused zones and 1 tamper zone 2)do I have to use zone pairing with 9(eol) and normal mode. 3) how would I wire a SECWARE SC517/WH to 9(eol) wiring 4) how do I connect a internal sounder to cpx(SECWARE 2 way 'Sound Bomb' Internal Sounder) many thanks thanks

I have received it - many thanks

thanks James. my order number is 17127. thanks

thanks support. I have linked the unused zone and it seems to be working fine. My order number is 17127 if you could kindly send me the engineer manual please. thanks

happy new year to everyone! I am programing the panel but not sure which zone type to select for lounge and other areas as there seems to be quite a few to choose from (alert, 24, monitor, ext/en etc) can someone please help me with what they all mean in cpx. I know what a ext/en is and I have selected my front door one as ext/ex but now sure what should others come under, I just want the others to fire when the alarm is set. a programing/engineer manual would be handy if anyone has got it please thanks