Alarmed! Posted July 4, 2010 Share Posted July 4, 2010 I'm tring to programme the bell time on this panel in engineering mode. When I press "6", LED's 1,2 and 3 should show but I'm getting 1,3,5 and 7 and then it won't go any further. Does anyone know what this means and why it is happening? Quote Link to comment Share on other sites More sharing options...
FastCar Posted July 4, 2010 Share Posted July 4, 2010 You press 7 to change the bell time , 6 is the zone names , but these are not available on the LED keypad. Quote Link to comment Share on other sites More sharing options...
Alarmed! Posted July 5, 2010 Author Share Posted July 5, 2010 Thanks for that - that works fine. The Engineer's guide ( 800-05263) which came with the panel says button "6" for the LED keypad, but doesn't say that it is different for the controls on the panel itself Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.