Search the Community
Showing results for tags 'galaxy flex'.
Found 2 results
-
Good morning, I am after some advice if I may please. I have a Galaxy Flex100 panel and we want to link up TWO touch centres to it. I believe on a standard panel we can only use one touchcentre. Is there any expansion modules or similar we can use so that both Touch Centres can be used on the system? Any advice greatly appreciated. Many thanks Neil Fearnley
-
I recently purchased a galaxy flex 20 and 4 DT7450-EOL motion sensors. I wired the sensor according to the instruction manual of the motion sensor. the fault loop to zone 1, Alarm test and tamper to zone 2. The "test" to the +12V since the flex control panel doesn't have a "remote led control". see http://rikain.com/Manuals/Intruder_alarms/Galaxy/Flex_Install%20manual.pdf page 17 for the wiring schem in the flex manual. see http://www.honeywellsecurity.com/uk/intruder/documents/CPIB_52_DT7450UK2_DT7450-EOL_TRANSITION_DN.pdf page 3 for the wiring of the sensor This doesn't seem to work. Can anybody tell if the wiring is correct? I find it odd that no connection is made on the V+ and V- of the sensor.
