[External 12V movement detector]

Hi Elaine, sorry, I should have been more specific.

I plan to hard wire into a Cytech Comfort panel. The sensor will trigger a perimeter alert and operate through an X10 output the external lighting.

Please could you identify, by model no, the sensors you are suggesting.

Thanks

 

Steve

[External 12V movement detector]

Hi

I am looking for a movement detector - nom 12v NC contacts - that I can site externally but functions as per an internal unit.

Is there such an item available

Thanks

Steve

[Replacing defunct Menvier TS700 system]

Hi

 

I am considering helping a friend upgrade his old system which I believe is a Menvier TS700.

Under consideration is a Scantronic 9752 from yourselves which I see comes complete with a keypad and is attractive because it comes with the option for wireless expansion.

First question: are there any alternatives you might suggest against this choice

and

Secondly: Please could you point me to a copy of the installation/programming manual for the 9752 so I can have a preliminary read through.

 

Kind regards and thanks

 

Steve

[TS690 availabilty?]

Not sure if there is any exchangability twixt the 690 and the 700. I have a TS700 here - working when taken out ...

Any good?

Cheers

Steve

[Detector(2) suitable for...]

Thank you for you reply.

 

Steve

[Detector(2) suitable for...]

I am upgrading the alarm system in my home and I am looking for...

 

1/. A quality detector to use in my conservatory which, being on the SW side of the house, experiences very high temperatures in the summer the obvious changes from direct sunlight to shade. I also have a problem in that the ideal location - where the sun will not strike the unit - has a piece of furniture obstructing. So I can only site in a position where at times the sun may actually strike the unit. Ideally I would like a unit that incorporates glass break detection

 

2/. We have a log cabin. I am concerned that - should anyone decide to enter one of the methods they could easily use is a battery operated jig/power saw to create a temporary doorway. I think I have seen a vibration detector that MIGHT pick up on this type of attack: am I mistaken

 

3/. Also have a couple of mildly substantial garden sheds, having run alarm cable to these can you suggest a detector that might be sufficiently tolerant to a "shed" environment?

 

Thank in anticipation

 

Steve